TRUMPF Laser Cutter (2007), operating hours 26257/9690 TruLaser 5030 classic, power 5000 W, XYZ 3000x1500x115 mm, RotoLas (2007)

RYAZAN Heavy Duty Centre Lathe RT2503, capacity DxL 630×1000 mm

RYAZAN Heavy Duty Centre Lathe RT2503, capacity DxL 630x1000 mm

MACHINE REF : 13041

Machines For Sale — Lathe, Conventional >=2m b/c

MAKE : RYAZAN Heavy Duty Centre Lathe

MODEL : RT2503, capacity DxL 630x1000 mm

CONTROLLER : conventional

NILES-MAGDEBURG Heavy Duty Lathe DP 3/3×20000, capacity DxL 2500×20000 mm, 3 off steadies (1979)

NILES-MAGDEBURG Heavy Duty Lathe DP 3/3x20000, capacity DxL 2500x20000 mm, 3 off steadies (1979)

MACHINE REF : 13015

Machines For Sale — Lathe, Conventional >=2m b/c

MAKE : NILES-MAGDEBURG Heavy Duty Lathe

MODEL : DP 3/3x20000, capacity DxL 2500x20000 mm, 3 off steadies

YEAR OF MANUFACTURE : 1979

CONTROLLER : conventional

SPECIFICATION : Swing over bed 2500 mm, Swing over cross slide 2000 mm, Swing in gap 3500 mm, Distance b/n centres 20000 mm, Max workpiece weight 30000 kg, Faceplate diameter 2500 mm Spindle diameter 100 mm, Spindle speeds range 0,45-140 rpm, Total power requirement 60 kW, Weight, ca. 64000 kg, 3 off steadies

Borer, Jig, Machines For Sale

HAUSER Jig Borer, very nice working condition OP 3, table 320×550 mm, XYZ 400x250x400 mm, accessories (1977)

HAUSER Jig Borer, very nice working condition OP 3, table 320x550 mm, XYZ 400x250x400 mm, accessories (1977)

MACHINE REF : 13054

Machines For Sale — Borer, Jig

MAKE : HAUSER Jig Borer, very nice working condition

MODEL : OP 3, table 320x550 mm, XYZ 400x250x400 mm, accessories

YEAR OF MANUFACTURE : 1977

CONTROLLER : conventional

Lathe-CNC-Sliding-Head, Machines For Sale

CITIZEN CNC sliding head lathe L32 VII (2004)

CITIZEN CNC sliding head lathe L32 VII (2004) ENQUIRY REF : MACHINE REF : 12363365 For Sale -- Lathe, CNC Sliding Head MAKE : CITIZEN CNC sliding head lathe MODEL : L32 VII (2004) with long parts adaptor and subspindle MAKE : CITIZEN CNC sliding head lathe MODEL : L32 VII (2004) with long parts adaptor and subspindle Controller : CINCOM Description : The machine has been serviced every year by Citizen on their CMSure service. ** NOTE: This machine will not be available for delivery until April 2017. The machine can be secured with a deposit and the balance paid before delivery. Specification : Serial No.: V13119 Year: 2004 Main Spindle: 5 turning tool positions, 4 side power driven tools, 4 static end working tools, Sub Spindle: 3 Static end working tools, The machine also comes with a single front/back end working power tool. Long parts gantry arm fitted (hence the three positions on the sub spindle), Coolblaster High Pressure Coolant. The coolblaster has 4 high pressure lines, one through the subspindle, the others through the tooling on the platen and subspindle tools, Absolent Fume extractor, Swarf conveyor, IEMCA BOSS 332/E/R magazine bar feed, Year Of Manufacture 2004

Grinder, Crankshaft, Machines For Sale

2 off TOS Crankshaft Grinders BEK 80 and FEK 80

2 off TOS Crankshaft Grinders BEK 80 and FEK 80

MACHINE REF : 13056

Machines For Sale — Grinder, Crankshaft

MAKE : 2 off TOS Crankshaft Grinders

MODEL : BEK 80 and FEK 80

DESCRIPTION : Price for pair, seller will split

KRAMATORSK Heavy Duty Centre Lathe 1A665, capacity DxL 1600×8000 mm

KRAMATORSK Heavy Duty Centre Lathe 1A665, capacity DxL 1600x8000 mm

MACHINE REF : 13052

Machines For Sale — Lathe, Conventional >=2m b/c

MAKE : KRAMATORSK Heavy Duty Centre Lathe

MODEL : 1A665, capacity DxL 1600x8000 mm

CONTROLLER : conventional

SPECIFICATION : Good mechanics, electrics need revision.

Grinder, Centreless, Machines For Sale

MONZESI ROSSI MONZA 400

MONZESI ROSSI MONZA 400

MACHINE REF : 13024

Machines For Sale — Grinder, Centreless

MAKE : MONZESI ROSSI MONZA

MODEL : 400

SPECIFICATION : MACHINE UNDER POWER GOOD WORKING CONDITION,HYDRAULIC PLANT NEW

DESCRIPTION : min workpieces diam 3 mm max workpieces diam 100 mm working grinding wheels dimension: 406 x 204 x 152 mm driving grinding wheels dimension: 254 x 204 x 115 mm

Grinder - Cylindrical Universal, Machines For Sale

TOS HOSTIVAR Universal Cylindrical Grinder BUC 63A, capacity DxL 630×3000 mm (1983)

TOS HOSTIVAR Universal Cylindrical Grinder BUC 63A, capacity DxL 630x3000 mm (1983)

MACHINE REF : 13064

Machines For Sale — Grinder, Cylindrical Universal

MAKE : TOS HOSTIVAR Universal Cylindrical Grinder

MODEL : BUC 63A, capacity DxL 630x3000 mm

YEAR OF MANUFACTURE : 1983

CONTROLLER : conventional

Gear, Hobber, Machines For Sale

TOS Gear Hobber FO10 (1980) 1m x modul 10, with change gears (1980)

TOS Gear Hobber FO10 (1980) 1m x modul 10, with change gears (1980)

MACHINE REF : 13034

Machines For Sale — Gear, Hobber

MAKE : TOS Gear Hobber

MODEL : FO10 (1980) 1m x modul 10, with change gears

YEAR OF MANUFACTURE : 1980

KRAMATORSK Heavy Duty Centre Lathe, very good working condition – VIDEO 1A670, capacity DxL 2000×10000 mm (1983)

KRAMATORSK Heavy Duty Centre Lathe, very good working condition - VIDEO 1A670, capacity DxL 2000x10000 mm (1983)

MACHINE REF : 13020

Machines For Sale — Lathe, Conventional >=2m b/c

MAKE : KRAMATORSK Heavy Duty Centre Lathe, very good working condition - VIDEO

MODEL : 1A670, capacity DxL 2000x10000 mm

YEAR OF MANUFACTURE : 1983

CONTROLLER : conventional

SPECIFICATION : MANY MORE PICTURES AVAILABLE ON REQUEST.

Machines For Sale, Press - Knuck Joint

BARNAUL Knuckle Joint Press, GO 2000, excellent condition KB8336B, capacity 400 t, table 500×630 mm

BARNAUL Knuckle Joint Press, GO 2000, excellent condition KB8336B, capacity 400 t, table 500x630 mm

MACHINE REF : 13051

Machines For Sale — Press, Knuck Joint

MAKE : BARNAUL Knuckle Joint Press, GO 2000, excellent condition

MODEL : KB8336B, capacity 400 t, table 500x630 mm

SPECIFICATION : MANY MORE PICTURES AVAILABLE ON REQUEST.

Lots/Batches of Machines, Machines For Sale

Lot of 3 off sheet metal machines Press brakes and guillotine

Lot of 3 off sheet metal machines Press brakes and guillotine

MACHINE REF : 13005

Machines For Sale — Lots/Batches of Machines

MAKE : Lot of 3 off sheet metal machines

MODEL : Press brakes and guillotine

SPECIFICATION : Press brake : COMESSA Model : PN 160 4000 x 160 T Press brake : SAGITA Model : 120x3000 3000 x 120 T Guillotine : COMESSA Model : CN 310 3000 x 10

DESCRIPTION : Loaded to truck

HARTFORD Vertical Machining Centre VMC1020S Fanuc OMD (1999)

HARTFORD Vertical Machining Centre VMC1020S Fanuc OMD ENQUIRY REF : MACHINE REF : 12379365 For Sale -- Machining Centre, Vertical MAKE : HARTFORD Vertical Machining Centre MODEL : VMC1020S Fanuc OMD (1999) MAKE : HARTFORD Vertical Machining Centre MODEL : VMC1020S Fanuc OMD (1999) Controller : FANUC OMD Specification : HARTFORD VMC1020 S X 1020 Y510 Z510mm Table 1200X600mm FACNUC Alarm 910 RAM PARITY, parameter problem No tooling Year Of Manufacture 1999

HURCO Vertical Machining Centre (2015) VMX30i, specification on pictures (2015)

HURCO Vertical Machining Centre (2015) VMX30i, specification on pictures (2015)

MACHINE REF : 13022

Machines For Sale — Machining Centre, Vertical

MAKE : HURCO Vertical Machining Centre (2015)

MODEL : VMX30i, specification on pictures

YEAR OF MANUFACTURE : 2015

CONTROLLER : HURCO

SPECIFICATION : Machine is manufactured and purchased from Germany 04/2015, first owner, in very good working condition, visible under power.

Grinder, Roll, Machines For Sale

NAXOS UNION CNC Roll Grinder W1800 X 9000 with 2 steadies, FANUC 0-G control (retrofitted 2017) FOB PRICE

NAXOS UNION CNC Roll Grinder W1800 X 9000 with 2 steadies, FANUC 0-G control (retrofitted 2017) FOB PRICE

MACHINE REF : 13075

Machines For Sale — Grinder, Roll

MAKE : NAXOS UNION CNC Roll Grinder

MODEL : W1800 X 9000 with 2 steadies, FANUC 0-G control (retrofitted 2017) FOB PRICE

SPECIFICATION : Make : NAXOS-UNION Type : W 1800 x 9,000 New in : 1961/2017 Control: CNC (FANUC 0-G) Origin : Germany Quotation: ex foundation "is as is,where is" Term of delivery: under powor ,immediately Description: - 2 Steadies Technical details grinding diameter 1800 mm grinding length 9,000 mm swing diameter 1850mm centre distance 9,000 mm grinding diameter - min. 250 mm centre height 900 mm workpiece weight 40 t work spindle drive DC 37kw spindle speeds 0 - 15 / 5 - 40 U/mm grinding spindle drive 15 kW spindle speeds 850 U/min max. dia. of grinding wheel 700 x 305 x 90 mm total power requirement ca. 50 kW weight of the machine 70 t dimensions of the machine ca. 15 X 7 m

Machines For Sale, Sheet Metal & Plate, Bending Rolls

AKYAPAK 4-rolls Plate Bending Rolls (2010) AHS 20/20, capacity 25×2100 mm (2010)

AKYAPAK 4-rolls Plate Bending Rolls (2010) AHS 20/20, capacity 25x2100 mm (2010)

MACHINE REF : 13019

Machines For Sale — Sheet Metal & Plate, Bending Rolls

MAKE : AKYAPAK 4-rolls Plate Bending Rolls (2010)

MODEL : AHS 20/20, capacity 25x2100 mm

YEAR OF MANUFACTURE : 2010

SPECIFICATION : Max bending thickness 25 mm, Max pre-bending thickness 20 mm, Max bending width 2100 mm, Upper roll diameter 330 mm, Lower roll diameter 300 mm, Side rolls diameter 240 mm, Weight 9 t

Machines For Sale, Machining Centre, Horizontal

You Ji Horizontal Machining Centre HMC 800BP (2012) Twin 800mm pallets, full B axis, Fanuc Oi MD (2012)

You Ji Horizontal Machining Centre HMC 800BP (2012) Twin 800mm pallets, full B axis, Fanuc Oi MD (2012)

MACHINE REF : 13044

Machines For Sale — Machining Centre, Horizontal

MAKE : You Ji Horizontal Machining Centre

MODEL : HMC 800BP (2012) Twin 800mm pallets, full B axis, Fanuc Oi MD

YEAR OF MANUFACTURE : 2012

CONTROLLER : Fanuc Oi MD

SPECIFICATION : Youji hmc yr 2012 with 2 pallet Table size 800 x 800 , speed 10,000 spindle bt-50, atc -40, table index 0.001 degrees spindle thru coolant

DESCRIPTION : Very good working order FOB Port price

Lathe-CNC-Sliding-Head, Machines For Sale

TORNOS CNC sliding head lathe GAMMA 20/6 – 2010 (8 axis) with bar loader and tooling – Fanuc (2010)

TORNOS CNC sliding head lathe GAMMA 20/6 - 2010 (8 axis) with bar loader and tooling - Fanuc (2010)

MACHINE REF : 13031

Machines For Sale — Lathe, CNC Sliding Head

MAKE : TORNOS CNC sliding head lathe

MODEL : GAMMA 20/6 - 2010 (8 axis) with bar loader and tooling - Fanuc

YEAR OF MANUFACTURE : 2010

CONTROLLER : FANUC 31i - A

SPECIFICATION : 3-20mm bar cap 10000rpm Subpindle and main spindle with C axes Bar loader 20000 Hours approx "powered on" time, approx 4500 hrs cutting time

DESCRIPTION : Excellent condition, under power in factory

Borer, Vertical/VTL Turret CNC, Machines For Sale

TOS HULIN CNC Turret Type Vertical Borer (1998), visible under power SKI 12 CNC, capacity DxH 1600×1200 mm (1998)

TOS HULIN CNC Turret Type Vertical Borer (1998), visible under power SKI 12 CNC, capacity DxH 1600x1200 mm (1998)

MACHINE REF : 13014

Machines For Sale — Borer, Vertical/VTL Turret CNC

MAKE : TOS HULIN CNC Turret Type Vertical Borer (1998), visible under power

MODEL : SKI 12 CNC, capacity DxH 1600x1200 mm

YEAR OF MANUFACTURE : 1998

CONTROLLER : SIEMENS SINUMERIK

SPECIFICATION : Faceplate diameter .......................................... 1200 mm, swing diameter................................................. 1600 mm, turning height .................................................. 1200 mm, max. ram stroke ............................................... 1100 mm, Tools ................................................................. 4

DESCRIPTION : The machine is in very good technical condition and under power.

Drill/Tap, CNC, Machines For Sale

HYUNDAI KIA Drill tap VX380T (2010) (2010)

HYUNDAI KIA Drill tap VX380T (2010) (2010)

MACHINE REF : 13032

Machines For Sale — Drill/Tap, CNC

MAKE : HYUNDAI KIA Drill tap

MODEL : VX380T (2010)

YEAR OF MANUFACTURE : 2010

CONTROLLER : Mitsubishi M70

SPECIFICATION : Specs available on request in PDF

PINNACLE VMC 1100S 700x1300mm (2005) (2005)

PINNACLE VMC 1100S 700x1300mm (2005) (2005)

MACHINE REF : 13025

Machines For Sale — Machining Centre, Vertical

MAKE : PINNACLE VMC

MODEL : 1100S 700x1300mm (2005)

YEAR OF MANUFACTURE : 2005

CONTROLLER : mitsubishi M65

SPECIFICATION : no ce marking

SEDIN Ram Type Vertical Borers – 2off in lot, price for lot ExW 1508, DxH 800×800 mm, 9,5 t AND 1510, DxH 1000×800 mm, 10,5 t

SEDIN Ram Type Vertical Borers - 2off in lot, price for lot ExW 1508, DxH 800x800 mm, 9,5 t AND 1510, DxH 1000x800 mm, 10,5 t

MACHINE REF : 13063

Machines For Sale — Borer, Vertical/VTL Turret

MAKE : SEDIN Ram Type Vertical Borers - 2off in lot, price for lot ExW

MODEL : 1508, DxH 800x800 mm, 9,5 t AND 1510, DxH 1000x800 mm, 10,5 t

CONTROLLER : conventional

Machines For Sale, Sheet Metal & Plate, Bending Rolls

AKYAPAK 4-rolls Plate Bending Rolls AHS 30/40, capacity 50×3150 mm

AKYAPAK 4-rolls Plate Bending Rolls AHS 30/40, capacity 50x3150 mm

MACHINE REF : 13017

Machines For Sale — Sheet Metal & Plate, Bending Rolls

MAKE : AKYAPAK 4-rolls Plate Bending Rolls

MODEL : AHS 30/40, capacity 50x3150 mm

Grinder, Cylindrical Internal CNC, Machines For Sale

JUNKER Internal and Face Grinder, in good working condition, 2OFF, VIDEOS BD 20 CNC, specification on pictures, FANUC, accessories, manuals (2001)

JUNKER Internal and Face Grinder, in good working condition, 2OFF, VIDEOS BD 20 CNC, specification on pictures, FANUC, accessories, manuals (2001)

MACHINE REF : 13065

Machines For Sale — Grinder, Cylindrical Internal CNC

MAKE : JUNKER Internal and Face Grinder, in good working condition, 2OFF, VIDEOS

MODEL : BD 20 CNC, specification on pictures, FANUC, accessories, manuals

YEAR OF MANUFACTURE : 2001

CONTROLLER : FANUC 210i-T

SEDIN Ram Type Vertical Borer 1510, capacity DxH 1000×800 mm

SEDIN Ram Type Vertical Borer 1510, capacity DxH 1000x800 mm

MACHINE REF : 13071

Machines For Sale — Borer, Vertical/VTL Turret

MAKE : SEDIN Ram Type Vertical Borer

MODEL : 1510, capacity DxH 1000x800 mm

CONTROLLER : conventional

Borer, Deep Hole, Machines For Sale

VDF Boehringer Deep Hole Borer 6000m capacity

VDF Boehringer Deep Hole Borer 6000m capacity

MACHINE REF : 13037

Machines For Sale — Borer, Deep Hole

MAKE : VDF Boehringer Deep Hole Borer

MODEL : 6000m capacity

SPECIFICATION : VDF Bohringer Deep Hole Borer x 6000mm Year 1975 Swing over bed 620mm Max dia held in roller steadies 275mm Max boring length 6,000mm Headstock 75 kw drive Headstock speeds 35.5 1800 rpm Counter rotation Boring bar drive 50kw Counter rotation speeds variable up to 1800 rpm Boring feeds 0 200mm/Min. Rapids 3,000mm/Min

DESCRIPTION : complete with 3 point roller steady Oil tank pumps and filters Rear swarf collection baskets and trays with scavenge pump Some bring bars and associated tooling included Loaded to truck

Borer, Jig, Machines For Sale

SIP Jig Borer SIP Hydroptic 8P 1.56m x 1.02m table, 3 axis DRO

SIP Jig Borer SIP Hydroptic 8P 1.56m x 1.02m table, 3 axis DRO

MACHINE REF : 13036

Machines For Sale — Borer, Jig

MAKE : SIP Jig Borer

MODEL : SIP Hydroptic 8P 1.56m x 1.02m table, 3 axis DRO

SPECIFICATION : Societe Genevoise SIP Hydroptic 8P Twin Column Jig Boring Machine with Vertical Spindle, Horizontal Side Head & 3 Axis DRO. Table Area 1560mm x 1020mm. With SIP PD-6H 800mm Rotary Table. Approx Distance Between Columns 1250mm. Approx Max Distance from Table Top to Under Cross Rail 1150mm.

Machines For Sale, Mill-Vertical CNC

CENTURION EUROPA UNIVERSAL Milling Machine CU6-CNC

CENTURION EUROPA UNIVERSAL Milling Machine CU6-CNC ENQUIRY REF : MACHINE REF : 12367365 For Sale -- Mill, Vertical CNC MAKE : CENTURION EUROPA UNIVERSAL Milling Machine MODEL : CU6-CNC 2m bed , Heidenhain Control (1998) MAKE : CENTURION EUROPA UNIVERSAL Milling Machine MODEL : CU6-CNC 2m bed , Heidenhain Control (1998) Specification : Europa, included some toolin, Speed adjuster, Adapter for different size tooling, table unmarked, very clean, Hidenhain control, Spindel " OFF" button on control panel not working, 2 metre bed, X1500, Y 700

HAAS Vertical Machining Centre WF4 – twin pallet (2005) (2005)

HAAS Vertical Machining Centre WF4 - twin pallet (2005) (2005)

MACHINE REF : 13076

Machines For Sale — Machining Centre, Vertical

MAKE : HAAS Vertical Machining Centre

MODEL : WF4 - twin pallet (2005)

YEAR OF MANUFACTURE : 2005

CONTROLLER : HAAS

DESCRIPTION : Faulty vector drive

Borer, Horizontal Table, Machines For Sale

TOS Table Type Horizontal Borer with facing head and tailstock, very nice W100, spindle 100 mm, table 1250×1250 mm, XYZW 1600x1120x1250x900 mm

TOS Table Type Horizontal Borer with facing head and tailstock, very nice W100, spindle 100 mm, table 1250x1250 mm, XYZW 1600x1120x1250x900 mm

MACHINE REF : 13012

Machines For Sale — Borer, Horizontal Table

MAKE : TOS Table Type Horizontal Borer with facing head and tailstock, very nice

MODEL : W100, spindle 100 mm, table 1250x1250 mm, XYZW 1600x1120x1250x900 mm

CONTROLLER : conventional

Machines For Sale, Sheet Metal & Plate, Press Brake

LVD Press brake PPN 180/40 – 4000mm x 180t with tooling, 1981 (1981)

LVD Press brake PPN 180/40 - 4000mm x 180t with tooling, 1981 (1981)

MACHINE REF : 13004

Machines For Sale — Sheet Metal & Plate, Press Brake

MAKE : LVD Press brake

MODEL : PPN 180/40 - 4000mm x 180t with tooling, 1981

YEAR OF MANUFACTURE : 1981

CHIRON Machining Centre FZ12W with Fanuc 21m

CHIRON Machining Centre FZ12W with Fanuc 21m

MACHINE REF : 13046

Machines For Sale — Machining Centre, Vertical

MAKE : CHIRON Machining Centre

MODEL : FZ12W with Fanuc 21m

CONTROLLER : Fanuc 21m

DESCRIPTION : seller seeking offers

FEELER Vertical Machining Centre FV-1200

FEELER Vertical Machining Centre FV-1200 ENQUIRY REF : MACHINE REF : 12387365 For Sale -- Machining Centre, Vertical MAKE : FEELER Vertical Machining Centre, very nice, visible under power, video possible MODEL : FV-1200 A, table 1300x600 mm, XYZ 1200x565x655 mm, 4th axis indexing head MAKE : FEELER Vertical Machining Centre, very nice, visible under power, video possible MODEL : FV-1200 A, table 1300x600 mm, XYZ 1200x565x655 mm, 4th axis indexing head Controller : FANUC 0-M Specification : X: 1200 mm, Y: 565 mm, Z: 655 mm, Table: 1300 x 600 mm, Range of spindle speeds: 6 000 rpm, Tool magazine: 24 pcs, Tool holder: BT 40, FANUC 0-M controller, 4th axis indexing head Year Of Manufacture 1997

Machines For Sale, Sheet Metal & Plate, Bending Rolls

RYAZAN 4-Rolls Plate Bending Rolls, working condition, visible under power IB2424, capacity 28×2500 mm (1983)

RYAZAN 4-Rolls Plate Bending Rolls, working condition, visible under power IB2424, capacity 28x2500 mm (1983)

MACHINE REF : 13040

Machines For Sale — Sheet Metal & Plate, Bending Rolls

MAKE : RYAZAN 4-Rolls Plate Bending Rolls, working condition, visible under power

MODEL : IB2424, capacity 28x2500 mm

YEAR OF MANUFACTURE : 1983

CONTROLLER : conventional

SPECIFICATION : In working condition, visible under power, slightely used.

Lathe, CNC Fixed Head, Machines For Sale

OKUMA Multi-tasking CNC Lathe (2007), in working condition – OFFERS INVITED MULTUS B300, capacity DxL 630×900 mm, specification on pictures (2007)

OKUMA Multi-tasking CNC Lathe (2007), in working condition - OFFERS INVITED MULTUS B300, capacity DxL 630x900 mm, specification on pictures (2007)

MACHINE REF : 13048

Machines For Sale — Lathe, CNC Fixed Head

MAKE : OKUMA Multi-tasking CNC Lathe (2007), in working condition - OFFERS INVITED

MODEL : MULTUS B300, capacity DxL 630x900 mm, specification on pictures

YEAR OF MANUFACTURE : 2007

CONTROLLER : OSP-P200L

SPECIFICATION : Manufactured 2007, installed 2011.

Machines For Sale, Sheet Metal & Plate, Bending Rolls

RYAZAN 3-Rolls Plate Bending Rolls – exloaded IB2222, capacity 16×2000 mm

RYAZAN 3-Rolls Plate Bending Rolls - exloaded IB2222, capacity 16x2000 mm

MACHINE REF : 13039

Machines For Sale — Sheet Metal & Plate, Bending Rolls

MAKE : RYAZAN 3-Rolls Plate Bending Rolls - exloaded

MODEL : IB2222, capacity 16x2000 mm

Machines For Sale, Machining Centre, 5 Axis Universal

DECKEL MAHO 5-axis Twin Pallet Universal Machining Centre, 9500 hrs only DMC 60T, thru spindle coolant, chip conveyor, tooling, under power (2007)

DECKEL MAHO 5-axis Twin Pallet Universal Machining Centre, 9500 hrs only DMC 60T, thru spindle coolant, chip conveyor, tooling, under power (2007)

MACHINE REF : 13023

Machines For Sale — Machining Centre, 5 Axis Universal

MAKE : DECKEL MAHO 5-axis Twin Pallet Universal Machining Centre, 9500 hrs only

MODEL : DMC 60T, thru spindle coolant, chip conveyor, tooling, under power

YEAR OF MANUFACTURE : 2007

CONTROLLER : HEIDENHAIN

SPECIFICATION : 30 X-Axis Travel 22 Y-Axis Travel 22 Z-Axis Travel B-Axis Plus 30 Degrees C-Axis Full 360 Degrees 20 to 12,000 RPM CAT 40 Spindle Coolant Thru Spindle Dual Pallets 60 ATC Heidenhain CNC Controls Full Simultaneous Head Swiveling Tooling & Chip Conveyor Weight: 21,000 Lbs. Floor Space: 160 X 250 X 98 HT

DESCRIPTION : Under Power In Plant. Good Condition, 9500 Cutting Hours

Borer, Vertical/VTL Ram Type, Machines For Sale

SEDIN Ram Type Vertical Borer, in working condition, EXLOADED – VIDEO AVAILABLE 1525, capacity DxH 2500×1600 mm

SEDIN Ram Type Vertical Borer, in working condition, EXLOADED - VIDEO AVAILABLE 1525, capacity DxH 2500x1600 mm

MACHINE REF : 13073

Machines For Sale — Borer, Vertical/VTL Ram Type

MAKE : SEDIN Ram Type Vertical Borer, in working condition, EXLOADED - VIDEO AVAILABLE

MODEL : 1525, capacity DxH 2500x1600 mm

CONTROLLER : conventional

Grinder-Surface Table, Machines For Sale

SNOW Surface Grinder OS 96

SNOW Surface Grinder OS 96 ENQUIRY REF : MACHINE REF : 12361365 For Sale -- Grinder, Surface Recip Table MAKE : SNOW Surface Grinder MODEL : OS 96 - 2.9m x 460mm x 700mm (vert) , twin 500mm x 1200mm tables MAKE : SNOW Surface Grinder MODEL : OS 96 - 2.9m x 460mm x 700mm (vert) , twin 500mm x 1200mm tables Specification : PRICE INCLUDES LOADING TO TRUCK With lot of grinding wheels

MAZAK Vertical Machining Centre SVC 2000L/120

MAZAK Vertical Machining Centre SVC 2000L/120 ENQUIRY REF : MACHINE REF : 12358365 For Sale -- Machining Centre, Vertical MAKE : MAZAK Vertical Machining Centre MODEL : SVC 2000L/120 (2005) 5.4m table MAKE : MAZAK Vertical Machining Centre MODEL : SVC 2000L/120 (2005) 5.4m table Controller : 640M Specification : MAZAK SVC 2000L/120 2005 X : 3080mm Y : 510mm Z : 510mm table : 5400mm x 508mm load 3400kg Mazatrol 640M ATC 30 outils SK40 POWER 22kW Year Of Manufacture 2005

Machines For Sale, Machining Centre, Horizontal

DAEWOO Twin Pallet HMC DMH500 (1998) – fanuc 16m control (1998)

DAEWOO Twin Pallet HMC DMH500 (1998) - fanuc 16m control (1998)

MACHINE REF : 13030

Machines For Sale — Machining Centre, Horizontal

MAKE : DAEWOO Twin Pallet HMC

MODEL : DMH500 (1998) - fanuc 16m control

YEAR OF MANUFACTURE : 1998

DESCRIPTION : loaded to container price

Machines For Sale, Wire, Drawing and Making

GWO LIAN Wire Drawing Line, used 3 months only HCDR-800-TD, wire class B500C, wire dia range 5-12 mm, capacity 20000 t/year (2007)

GWO LIAN Wire Drawing Line, used 3 months only HCDR-800-TD, wire class B500C, wire dia range 5-12 mm, capacity 20000 t/year (2007)

MACHINE REF : 13067

Machines For Sale — Wire, Drawing and Making

MAKE : GWO LIAN Wire Drawing Line, used 3 months only

MODEL : HCDR-800-TD, wire class B500C, wire dia range 5-12 mm, capacity 20000 t/year

YEAR OF MANUFACTURE : 2007

Machines For Sale, Press, Screw

CHIMKENT Screw Press – VIDEO F1736, capacity 400 t, table 780×880 mm

CHIMKENT Screw Press - VIDEO F1736, capacity 400 t, table 780x880 mm

MACHINE REF : 13053

Machines For Sale — Press, Screw

MAKE : CHIMKENT Screw Press - VIDEO

MODEL : F1736, capacity 400 t, table 780x880 mm

SPECIFICATION : Nominal effort 4000 kN, Ram stroke 450 mm, Distance b/n ram and table 450 mm, Number of strokes per minute 30, Table size 780x880 mm, Main motor power 50 kW, Overall dimensions LxWxH 4400x2360x5500 mm, Weight 30 t

Machines For Sale, Sheet Metal & Plate, Bending Rolls

PARMIGIANI CNC 4-rolls Plate Bending Rolls VBH-3100/40, capacity 40×3100 mm

PARMIGIANI CNC 4-rolls Plate Bending Rolls VBH-3100/40, capacity 40x3100 mm

MACHINE REF : 13018

Machines For Sale — Sheet Metal & Plate, Bending Rolls

MAKE : PARMIGIANI CNC 4-rolls Plate Bending Rolls

MODEL : VBH-3100/40, capacity 40x3100 mm

CONTROLLER : CNC

Borer, Jig, Machines For Sale

MAS Jig Borer – CIF PRICE WKV 100, table 1000×1600 mm, weight 16 t, tooling, attachments

MAS Jig Borer - CIF PRICE WKV 100, table 1000x1600 mm, weight 16 t, tooling, attachments

MACHINE REF : 13049

Machines For Sale — Borer, Jig

MAKE : MAS Jig Borer - CIF PRICE

MODEL : WKV 100, table 1000x1600 mm, weight 16 t, tooling, attachments

CONTROLLER : conventional

Machines For Sale, Sheet Metal & Plate-Shear/Guillotine

PIESOK Guillotine Shear (1995) CNTA 3150/10A

PIESOK Guillotine Shear (1995) CNTA 3150/10A ENQUIRY REF : MACHINE REF : 12391365 For Sale -- Sheet Metal & Plate, Shear/Guillotine MAKE : PIESOK Guillotine Shear (1995) MODEL : CNTA 3150/10A, capacity 10x3150 mm, weight 11500 kg MAKE : PIESOK Guillotine Shear (1995) MODEL : CNTA 3150/10A, capacity 10x3150 mm, weight 11500 kg Controller : conventional Year Of Manufacture 1995 PRICE : 16500 EUR (Prices are quoted for machines ex works, not loaded to transport, unless otherwise agreed.) Machines are offered subject to prior sale and payment terms are 100% cleared funds against invoice and before removal unless otherwise agreed. We reserve the right to change price and amend specifications without prior notice and cannot be held responsible for any errors contained in the data herein. It is recommended that specifications and other factual data are checked before purchase.

SEDIN Ram Type Vertical Borer, in working condition, FCA – VIDEO AVAILABLE 1516F1, capacity DxH1600x1000 mm, weight 19,2 t, DRO (1980)

SEDIN Ram Type Vertical Borer, in working condition, FCA - VIDEO AVAILABLE 1516F1, capacity DxH1600x1000 mm, weight 19,2 t, DRO (1980)

MACHINE REF : 13062

Machines For Sale — Borer, Vertical/VTL Turret

MAKE : SEDIN Ram Type Vertical Borer, in working condition, FCA - VIDEO AVAILABLE

MODEL : 1516F1, capacity DxH1600x1000 mm, weight 19,2 t, DRO

YEAR OF MANUFACTURE : 1980

CONTROLLER : DRO

Machines For Sale, Sheet Metal & Plate - Laser Cutter

TRUMPF Laser Cutter (2006), under power, hours 40670 / 19512 – EXLOADED TRUMATIC 4030, 4000W, XYZ 4000x2000x112 mm (2006)

TRUMPF Laser Cutter (2006), under power, hours 40670 / 19512 - EXLOADED TRUMATIC 4030, 4000W, XYZ 4000x2000x112 mm (2006)

MACHINE REF : 13013

Machines For Sale — Sheet Metal & Plate, Laser Cutter

MAKE : TRUMPF Laser Cutter (2006), under power, hours 40670 / 19512 - EXLOADED

MODEL : TRUMATIC 4030, 4000W, XYZ 4000x2000x112 mm

YEAR OF MANUFACTURE : 2006

CONTROLLER : SIEMENS SINUMERIK 840 D

SPECIFICATION : Laser Power : 4000W Working Area: 4000 x 2000 x 112 mm Work area : in X direction 4000 mm in Y direction 2000 mm in Z direction 112 mm Max. Sheet Thickness: 20 mm Accuracy: 0,01 mm SPEED Max. positioning speed axially parallel 60 m/min simultaneous 85 m/min Dimensions : Lenght 11600 mm Width 5200 mm Height 2000 mm Total weight approx. 16000 kg

DESCRIPTION : Laser ON :40670, Beam ON:19512; This laser is in good technical condition and under power.

Lathe, CNC Fixed Head, Machines For Sale

NAKAMURA CNC Turning Centre TW10MM twin spindle, twin turret, C axis, bar loader (1998)

NAKAMURA CNC Turning Centre TW10MM twin spindle, twin turret, C axis, bar loader (1998)

MACHINE REF : 13028

Machines For Sale — Lathe, CNC Fixed Head

MAKE : NAKAMURA CNC Turning Centre

MODEL : TW10MM twin spindle, twin turret, C axis, bar loader

YEAR OF MANUFACTURE : 1998

CONTROLLER : FANUC 16TT

SPECIFICATION : NAKAMURA TOME TW-10MM WITH FANUC 16TT Make: Nakamura Model Number: TW-10MM Controller: Fanuc Series 16TT Control SPECIFICATIONS Max Swing Over Bed 8.27 IN Max Turning Diameter 8.26 IN Max Turning Length 6.10 IN Distance B/w Spindle Nose and Turret 3.74 11.61 IN Bar Capacity Spindle 1 : 1.65 IN Bar Capacity Spindle 2 : 1.65 IN Spindle Speeds 55 - 5500 RPM Travels ( X Axis) both 7.28 IN Travels ( Z Axis) left / right 7.87 IN / 24.41 IN Turret Type (2) 12 Position Turrets Approx Weight 11,300 Lbs EQUIPPED WITH IEMCA MAGAZINE BAR FEEDER MODEL BOSS 542/37 Twin Turret / Twin Spindle Design Live Milling Capability - All 12 Position both turrets Full C Axis Spindle Rotation (2) Collet Chucks Automatic Parts Catcher RS 232 Port Interface Coolant System Sub Spindle

DESCRIPTION : This machine is in good working order . Sold without live tooling.