WANTED: Internal Thread Grinding Attachments for STANKO Thread Grinders 5822M - 8off and 5K822B - 1off

MACHINE REF :9430

Wanted Machines — . Tooling, Attachments

MAKE :WANTED: Internal Thread Grinding Attachments for STANKO Thread Grinders

MODEL :5822M - 8off and 5K822B - 1off

Pfauter Gear Shapers Model LS1000, LS1250, LS630, PE 500 (cnc)

MACHINE REF :9441

Wanted Machines — . Gear, Shaper

MAKE :Pfauter Gear Shapers

MODEL :Model LS1000, LS1250, LS630, PE 500 (cnc)

WANTED - Mikron Vertical Machining Centre 3 axes - VCP 800 or 600 models - nearly new

MACHINE REF :9443

Wanted Machines — . Machining Centre, Vertical

MAKE :WANTED - Mikron

MODEL :Vertical Machining Centre 3 axes - VCP 800 or 600 models - nearly new

WANTED Slant Bed CNC lathe 1.5m to2m x 700mm diameter - Any control, up to 15 yrs old

MACHINE REF :9452

Wanted Machines — . Lathe, CNC Fixed Head

MAKE :WANTED Slant Bed CNC lathe

MODEL :1.5m to2m x 700mm diameter - Any control, up to 15 yrs old

SPECIFICATION :CNC turning lathe slant bed Between center length: 1500 to 2000 mm Spindle bore : +/- 100 mm Diam of part: 600 – 700 mm CNC : any control Machine in good condition Located in Europe

WANTED - MONZA Centreless Grinder model 500 or 1500 - throughfeed

MACHINE REF :9455

Wanted Machines — . Grinder, Centreless

MAKE :WANTED - MONZA Centreless Grinder

MODEL :model 500 or 1500 - throughfeed

WANTED Plano Mill 3m x 10m capacity

MACHINE REF :9459

Wanted Machines — . Mill, Plano/Gantry Type

MAKE :WANTED Plano Mill

MODEL :3m x 10m capacity

STRIPPIT LVD CNC Punch Press - 200 hrs ONLY! SIENA 1225, max sheet size TxWxL 6,4x1250x2500 mm, FANUC, tooling (2006)

MACHINE REF :9463

Machines For Sale — . Sheet Metal & Plate, Punch Press

MAKE :STRIPPIT LVD CNC Punch Press - 200 hrs ONLY!

MODEL :SIENA 1225, max sheet size TxWxL 6,4x1250x2500 mm, FANUC, tooling

YEAR OF MANUFACTURE :2006

CONTROLLER :GE-FANUC

SPECIFICATION :ONLY 200 WORK HOURS! FULL SET OF UNIVERSAL TOOLING AVAILABLE.

WANTED - Knife Grinder 2.5m working length

MACHINE REF :9469

Wanted Machines — . Grinder, Knife

MAKE :WANTED - Knife Grinder

MODEL :2.5m working length

SPECIFICATION :working machine required

WANTED - Gildemeister Multispindle lathe Model GM20 (serie 4502) with Cucchi bar loader

MACHINE REF :9479

Wanted Machines — . Lathe, Multispindle

MAKE :WANTED - Gildemeister Multispindle lathe

MODEL :Model GM20 (serie 4502) with Cucchi bar loader

WANTED Vertical Machining Centre 1000mm in X approx y2000, Fanuc or Heidenhain control

MACHINE REF :9481

Wanted Machines — . Machining Centre, Vertical

MAKE :WANTED Vertical Machining Centre

MODEL :1000mm in X approx y2000, Fanuc or Heidenhain control

WANTED - WMW Heckert Thread Grinder ZFWVG 250 X 2000 (c 1982 or newer)

MACHINE REF :9489

Wanted Machines — . Grinder, Thread

MAKE :WANTED - WMW Heckert Thread Grinder

MODEL :ZFWVG 250 X 2000 (c 1982 or newer)

Rotary Table for UNION BFT 160 - EXCELLENT CONDITION - FOB PRICE Table size 2300x2000 mm

MACHINE REF :9503

Machines For Sale — . Tables, Rotary Conventional

MAKE :Rotary Table for UNION BFT 160 - EXCELLENT CONDITION - FOB PRICE

MODEL :Table size 2300x2000 mm

CONTROLLER :conventional

SPECIFICATION :VIDEO AVAILABLE ON REQUEST. PRICE IS ON FOB BASIS.

WANTED - Lathe 2-3m between centres and 700mm swing fanuc controlled preferably.

MACHINE REF :9509

Wanted Machines — . Lathe, CNC Fixed Head >=2m b/c

MAKE :WANTED - Lathe 2-3m between centres and 700mm swing

MODEL :fanuc controlled preferably.

SCHUTTE SF42 MULTI SPINDLE AUTOMATIC LATHE (1977)

MACHINE REF :15973

Machines For Sale — . Lathe, Multispindle

MAKE :SCHUTTE

MODEL :SF42 MULTI SPINDLE AUTOMATIC LATHE

YEAR OF MANUFACTURE :1977

SPECIFICATION :Serial No.: Serie 20 nr. 15 Year: 1977 Original Schutte pick up attachment, Standard drilling attachments, Standard slides, Chip conveyor, Pietro Cucchi magazine bar loader type PB48, age 1998, to accommodate 4 metre (12ft) bar lengths.

ERFURT Horizontal Knuckle Joint Press - FCA PRICE PknAF 250, fully complete, worked very little

MACHINE REF :8407

Machines For Sale — . Press, Knuck Joint

MAKE :ERFURT Horizontal Knuckle Joint Press - FCA PRICE

MODEL :PknAF 250, fully complete, worked very little

CONTROLLER :conventional

CINCINNATI Horizontal Machining Centre HPC 500XT (2000) 9 x 500mm pallets, 1 degree indexing, 180 atc

MACHINE REF :13113

Machines For Sale — . Machining Centre, Horizontal

MAKE :CINCINNATI Horizontal Machining Centre

MODEL :HPC 500XT (2000) 9 x 500mm pallets, 1 degree indexing, 180 atc

CONTROLLER :Siemens Acramatic 2100

SPECIFICATION :750 x 700 x 750mm XYZ 1 degree indexing 180ATC 9 off 500mm pallets Thru spindle coolant

CHEVALIER CNC Lathe FCL 2660 - 660mm x 1.5m capacity (2009) (2009)

MACHINE REF :15403

Machines For Sale — . Lathe, CNC Fixed Head >=2m b/c

MAKE :CHEVALIER CNC Lathe

MODEL :FCL 2660 - 660mm x 1.5m capacity (2009)

YEAR OF MANUFACTURE :2009

CONTROLLER :SIEMENS

SPECIFICATION :Swing 660mm Swing over slide 400mm Bore 105mm Between centres 1.5m Spindle speed 2000rpm Motor power 11/15kw Automatic turret 8 pos Weight 4.4t Dims 3.6M X 2.2M X 1.98M With various tooling as per images, support, etc

CHURCHILL Spline Grinder - FCA PRICE SHC, grinding length 1500 mm (1968)

MACHINE REF :8404

Machines For Sale — . Grinder, Spline

MAKE :CHURCHILL Spline Grinder - FCA PRICE

MODEL :SHC, grinding length 1500 mm

YEAR OF MANUFACTURE :1968

CONTROLLER :conventional

SPECIFICATION :Machine has precision accuracy, and pneumatic bearings. Equipment is in good technical condition, worked a little. PRICE IS ON FCA BASIS.

TOS VARNSDORF Table Type Horizontal Borer with DRO (1985), ball screws on table WHN 13.4 A, spindle 130 mm, table 1800x1600 mm, XYZW 2000x2400x1250x800 mm (1985)

MACHINE REF :10289

Machines For Sale — . Borer, Horizontal Table

MAKE :TOS VARNSDORF Table Type Horizontal Borer with DRO (1985), ball screws on table

MODEL :WHN 13.4 A, spindle 130 mm, table 1800x1600 mm, XYZW 2000x2400x1250x800 mm

YEAR OF MANUFACTURE :1985

CONTROLLER :ELBO VS 2000

SPECIFICATION :Spindle diameter 130 mm X 2000 mm Y 2000 mm Z 1250 mm W 800 mm Table surface 1800 x 1800 mm Max pindle speed: 710 rpm

DESCRIPTION :New electrics, ball screws on the table. Faceplate and milling heads available (please check pictures).

WANTED - Radial Drill 2.5m - 3m x 100mm capacity (budget 6-7000usd)

MACHINE REF :3294

Wanted Machines — . Drill, Radial

MAKE :WANTED - Radial Drill

MODEL :2.5m - 3m x 100mm capacity (budget 6-7000usd)

GLEASON Straight Bevel Revacycle Machine, in working condition 726

MACHINE REF :14483

Machines For Sale — . Gear, Generator

MAKE :GLEASON Straight Bevel Revacycle Machine, in working condition

MODEL :726

SPECIFICATION :Root Angle Range......................................15-55 Deg. Pitch Diameter- Manual................................152MM Depth 21 Inch Seperate Roughing And Finishing.........14.8MM Depth 21 Inch Complete................................10.7MM Face Width At Root-21 Inch Cutters....................28MM Index Range...........................................8-50 Work Spindle Diameter Of Tapered Hole At Large End................99.22MM Taper Per Foot.......................................15.48MM Depth Of Taper.......................................15.8MM Counterbore Behind Taper.............................57.2 X 77.9 MM Diameter Of Hole Through Spindle.....................22.3MM Feeds And Speeds Cutter Speeds 21 Inch Cutters........................107-163 FT/Min. Feeds 21 Inch Cutters................................2.0-3.1 Sec/Tool Main Drive Motor-10HP.................................1800 RPM Hydraulic Motor-7.5HP.................................1800 RPM Cutting Oil Pump-2HP..................................3600 RPM Chip Screw Motor-1/4HP................................1800 RPM Machine Dimensions L X W Automatic....................3.2 X 2.26m Machine Weight Manual/Automatic.......................7484/8664 KG

HITACHI 1350mm x 3mm Stainless cut to length line (1993)

MACHINE REF :16254

Machines For Sale — . Sheet Metal, Cut To Length

MAKE :HITACHI

MODEL :1350mm x 3mm Stainless cut to length line

YEAR OF MANUFACTURE :1993

SPECIFICATION :PRICE ON REQUEST FURTHER IMAGES ON REQUEST 1350 mm x 3mm Stainless Steel Cut to Length Line (Flying type) Make: Hitachi Year: 1993 Material: stainless steel, surface treated steel

DESCRIPTION :Thickness: 0.3–3 mm (as of stainless steel) Width: 500-1350 mm Trim: 5-25 mm on one side (more than twice the plate thickness) Material coil: internal diameter 508 mm, external diameter 600–1800 mm weight maximum 15 tons Width accuracy: 500–1350 mm plus or minus 0.2 mm (when side trimming) Product length: 400–6000 mm Plus/minus 0.3 mm 6-leveler (6-hi) leveler 2 types Tension: 45 to 50 kg/mm2 Yield point: 28 kg/mm2 Cutting method: Cut while running (flying), numerically controlled rocking type flying shears (Cutting speed) 20–40/80 m/min Speed 2-speed change type 0.3 to 1.2 mm: 20 to 80 m/min 0.21–3 mm: 20–40 m/min Slow operation: 0.8 m/min Conveyor speed: 20~120m/min Cut count: up to 150 cuts/min (Product piling) Plate width: 500–1350 mm No1 piler: 400 to 3100 mm (also used as a reject piler) No2 piler: 400–6100 mm Load height: up to 600mm Load weight: up to 4 tons Line direction: From right to left on control panel Line: Approximately 13 m x 49.050 m (Major facilities) Coil skid Coil car Pay off reel and a paper winder Coil opener Rough Leveler Shear No. 1 Looper Guide Side guide and pinch roller Side trimmer Scrap winder x2 No.1 Finisher Leveler (6-hi) No2 Finisher Leveler (6-hi) No 2 Looper Guide Measuring roller, feed roller and paper-off reel Shear Conveyor Cart No1/No2 piler type Hydraulic unit: Type Valve stand type (Coil skid) V-type fixed skid Coil maintenance: 1 coil Coil weight: up to 15 tonnes Coil diameter: 600 to 1800 mm urethane rubber (Coil Car) Cradle roller type Hydraulic boost Electricity transfer driving type Two guide lots hydraulic cylinder elevating type (payoff reel and paper winder) Overhang, single-mant 4-segment type Paper reel motor: DC 5.5KW 400/1600 RPM, attached to brake Paper winder: cone type, (motor DC 1.5KW, 1750 RPM) (Coil Opener) Knife edge method (Rough Leveler) 2-stage (2hi) 5-body roller leveler Pinch rollers: 160 mm × 1450 mm 2 pieces, The upper part of the pinch roller is hydraulic cylinder press-down, and the lower roller is fixed 5 workload rollers 130mm x 1450mm The upper roller of the workload roller is electrically pressed, and the lower roller is fixed 0–40/80 m/min Two-stage change 0.3 to 1.6 mmt: 80 m/min 1.7 to 1.6 mmt: 40 m/min Motor: DC 18.5 KW, 1750 RPM, Brake Attachment Pressing motor: 2 1.5KW 100RPMs with brakes (Shear) Hydraulic up cut shear Knife size: 25 mm thickness × 150 mm width × 1450 mm length (No. 1 Looper Guide) Table lift Hydraulic cylinder operation method Loop: Light Volume Control Method Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller (Side guide and pinch roller) Vertical Free Roller Electrically switched type Side guide roller: 90 mm diameter × 150 mm length × 6 bones Pinch Roller: 2nd Stage (2hi) Roller: 160 mm diameter × 1450 mm length × 2 bones Upper roller: pneumatic cylinder pressure free roller Lower Roller: Fixed Drive Roller (Side trimmer) Overhang Drive Cut 0–40/80 m/min 2-stage change type 0.3 to 1.6 mmt: 80 m/min 1.7 to 1.6 mmt: 40 m/min Cutter diameter: 320 mm / 190 mm internal diameter × 20 mm thickness Roller: 320 mm external diameter × 19 mm internal diameter × 20 mm thickness Motor: DC 5.5KW 1750RPM (Scrap winder) Two machines Link Pin Gauge Type (Hydraulic Cylinder Opening and Closing Type) Motor: 2 DC 2.2KW 1450 RPM (No1 Finisher Leveler) 6-level (6-hi) 17 leveler Thickness: 1.21–3.0 mm Speed: 6 to 40/80 m/min Thickness 0.3–1.2 mm 6–80 m/min Thickness 1.21–3 mm 6–40 m/min Pinch roller: 180 mm × 1750 mm × 2 bones The upper roll is a pneumatic cylinder. The lower roll is fixed Rubber lining drive roller Work roll: 60mm x 1750mm x 17e 8 for the upper roll, 9 for the lower roll Plated abrasive roller Medium roller: 50 mm × 1750 mm × 19 pieces 9 for the upper roll, 10 for the bottom roll Backup Roller: 88 mm Diameter x 50 mm Length x 7 rows Pressing Method: Lower Roller Parallel Pressing Pressing speed: 0.25 mm/sec Pressurization: plus or minus 5 mm Motor: DC 55KW 1750 RPM Brake Attachment (No2 Finisher Leveler) 6-level (6-hi) 17 leveler Plate thickness: 0.3–1.2 mm Speed: 5 to 80 m/min Pinch roller: 180 mm × 1750 mm × 2 bones The upper roll is a pneumatic cylinder. The lower roll is fixed Rubber lining drive roller Work roll: 35mm x 1750mm x 17bon 8 for the upper roll, 9 for the lower roll Plated abrasive roller Medium Roller: 32 mm × 1750 mm × 19 pieces 9 for the upper roll, 10 for the bottom roll Backup Roller: 99 mm Diameter x 50 mm Length x 7 rows Roller bearing type Pressing Method: Lower Roller Parallel Pressing Pressing speed: 0.25 mm/sec Pressurization: plus or minus 5 mm Motor: DC 35KW 1750RPM Brake Attachment (No. 2 Looper Guide) Table lift Hydraulic cylinder operation method Loop: How to control the amount of light (amount of light) Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller (Measuring roll/feed roller/paper vinyl payoff reel) Measuring roller: The upper roll is pneumatic pressing, the lower roll is fixed, the pressing amount is 30 mm Feed roller: Upper roll is pneumatic cylinder press, lower roll is fixed, press load is 40 mm Motor: DC 2.2KW 1750RPM (Shear) Fluctuating Flying shear 0.3~3mm Speed: 2 groups of 20–40/80 m/min Thickness 0.3–1.6 mm 80 m/min Tlate thickness 1.6–3 mm 40 m/min Cut count: up to 150 cuts/min Cutting length: 400–6000 mm Electric up CUT shear Cut up and down knife die via motor, reducer, pinion stand crankshaft Knife: 20 mmt × 80 mm × 1400 mm × 1 set The top knife is a straight knife, and the bottom is a V-lock knife Adjustment: Wedge Motor: DC 75KW 550RPM (conveyor) Belt conveyor type Belt width: 1200 mm Conveyor length: 3800 mm Motor DC 5.5KW 1450RPM Brake Attachment (No. 1 No. 2 piler) No1 piler: Combined use of reject truck, air blower Combined use of side conveyor No2 piler: Combined suction conveyor and air blower Loading height: 600 mm Lift: Hydraulic lift volume 650 mm Motor: 4 1.5KW 150RPM units for side guide end stoppers 2.2 KW 1500RPM for lifters 1.5KW for cart 7.5KW for blower (Hydraulic device) 70 kg/cm2 × 100 L/min Pen pump Motor: DC 18.5 KW 1000 RPM (Supply power) AC400 V,50 Hertz 3 Phase / AC200V, 50 Hertz 3 Phase (Control power) AC 200V, 50 Hz Single Phase (Compressed air) Compressed air required: 5 kg/cm2

WANTED - Tornos DECO lathe 2000 - 13a or 10a model

MACHINE REF :3640

Wanted Machines — . Lathe, CNC Sliding Head

MAKE :WANTED - Tornos DECO lathe

MODEL :2000 - 13a or 10a model

Arpege CNC Lathe Tempo 450 (2007) 250mm chuck x 1.5m between centres (2007)

MACHINE REF :4672

Machines For Sale — . Lathe, CNC Fixed Head

MAKE :Arpege CNC Lathe

MODEL :Tempo 450 (2007) 250mm chuck x 1.5m between centres

YEAR OF MANUFACTURE :2007

CONTROLLER :Fagor 8040 TC

SPECIFICATION :1 Tour Arpège Modèle Tempo 450 Fagor 8040-TC 1 Tourelle 8 Positions Servo Eléctrique Position Arrière 1 Manivelle Potable 1 Lunette Fixe Diam 20-200 mm 1 Mandrin Lasner d250 3 Axes 1500 Entre pointe Année 2007 .

WANTED: 4-axis Vertical Machining Centre in working condition, 1998-2000 Table min 400x800 mm (1998)

MACHINE REF : 12959

Wanted Machines — Machining Centre, Vertical

MAKE : WANTED: 4-axis Vertical Machining Centre in working condition, 1998-2000

MODEL : Table min 400x800 mm

YEAR OF MANUFACTURE : 1998

CONTROLLER : CNC

WANTED: RYAZAN Centre Lathe 165, capacity 1000x5000 mm

MACHINE REF :12956

Wanted Machines — . Lathe, Conventional >=2m b/c

MAKE :WANTED: RYAZAN Centre Lathe

MODEL :165, capacity 1000x5000 mm

CONTROLLER :conventional

PONAR Hydraulic Press, very nice condition - FCA PRICE PHM-250, capacity 250 t, table 1000x1000 mm

MACHINE REF :13677

Machines For Sale — . Press, Hydraulic

MAKE :PONAR Hydraulic Press, very nice condition - FCA PRICE

MODEL :PHM-250, capacity 250 t, table 1000x1000 mm

CONTROLLER :conventional

BURKHARDT CNC Jig Drill & Borer HYOP 300 NC, table 2200x3000 mm, 1off Vertical & 2off Horizontal Heads (1974)

MACHINE REF :9200

Machines For Sale — . Borer, Jig CNC

MAKE :BURKHARDT CNC Jig Drill & Borer

MODEL :HYOP 300 NC, table 2200x3000 mm, 1off Vertical & 2off Horizontal Heads

YEAR OF MANUFACTURE :1974

CONTROLLER :CNC

HOFFMANN Dividing head Brand New , never used

MACHINE REF :15841

Machines For Sale — . Miscellaneous

MAKE :HOFFMANN Dividing head

MODEL :Brand New , never used

HAAS Vertical Machining Centre VF-5 1320mm x 584mm table Y2000 (2000)

MACHINE REF :14457

Machines For Sale — . Machining Centre, Vertical

MAKE :HAAS Vertical Machining Centre

MODEL :VF-5 1320mm x 584mm table Y2000

YEAR OF MANUFACTURE :2000

CONTROLLER :HAAS

SPECIFICATION :Table Size 1320 x 584mm Traverses X/Y/Z 1270 x 660 x 635mm Spindle Speeds to 7500 RPM Spindle Motor Gearbox 20HP 21 Auto Tool Changer Full Size Sub Table Program Coolant Renishaw Probing 18 off Pieces of Spindle Tooling

DESCRIPTION :VIDEO ON REQUEST