Machining Centre-Vertical

CHIRON Twin Pallet Vertical Machining Centre, fully working - EXLOADED FZ12, swarf conveyor, tooling, books, under power in one week time (1987)

MACHINE REF :12595

Machines For Sale — . Machining Centre, Vertical

MAKE :CHIRON Twin Pallet Vertical Machining Centre, fully working - EXLOADED

MODEL :FZ12, swarf conveyor, tooling, books, under power in one week time

YEAR OF MANUFACTURE :1987

CONTROLLER :FANUC OM

CHIRON Twin Pallet/Spindle CNC Vertical Machining Centre DZ 18W, pallet 2x 940x520 mm, XYZ 830/550/630 mm, 2x 12x ATC (2007)

MACHINE REF :14210

Machines For Sale — . Machining Centre, Vertical

MAKE :CHIRON Twin Pallet/Spindle CNC Vertical Machining Centre

MODEL :DZ 18W, pallet 2x 940x520 mm, XYZ 830/550/630 mm, 2x 12x ATC

YEAR OF MANUFACTURE :2007

CONTROLLER :FANUC Series 18i-MB5

CHIRON Vertical Machining Centre F708K S Magnum - full 5 axis (2008) (2008)

MACHINE REF :6067

Machines For Sale — . Machining Centre, Vertical

MAKE :CHIRON Vertical Machining Centre

MODEL :F708K S Magnum - full 5 axis (2008)

YEAR OF MANUFACTURE :2008

CONTROLLER :Fanuc 18iMB5 5-axis

SPECIFICATION :Machine is Comparable to Willemin (Mill/Turn) Column Moving machining center with Fixed Table CAN BE SET UP FOR BAR FEEDING CNC Control: Fanuc 18iMB5 5-axis CNC Control simultaneous machining (details below) Motor at 100%: 9.4 HP (7kW) Motor at 25%: 18.8HP (14kW) Main Spindle Speeds: 0-15,000 RPM Turning Spindle speeds: 15 - 8,000 RPM * *Barfeed Interface included (originally interfaced for an LNS bar feed) NC Swivel Head: -20 / +115 deg Rapid traverse: 60 RPM Increments: 0.0001 deg with direct measuring system: +/- 5" Swivel Head Speed: 0.5 seconds to swivel from 0-90deg Travels: X-axis: 450mm (17.7") Y-axis: 270mm (10.6") Z-AXIS: 310MM (12.2") Drilling capacity in steel 60: 0.47" (12mm) Tapping capacity: 0.31" (M8) Milling capacity in steel 60: 1.893 ci/min (30 cm3/min) Automatic Tool Changer: 40 tools Tool Shank: HSK-A 40 DIN 69893 Max tool Dia: 1.97"(adj. magazine pos are full) Max tool Dia: 3.94"(adj. magazine position open) Tool length: 6.3" (160mm) Max tool weight: 2.6 lbs Tool Change time: 0.8 sec Chip-to-chip time: 1.9 sec Lathe spindle capacity (water cooled): 32mm (1.25") Motor: 4kW @ 100% / 8.5kW @ 15% Spindle speeds: 15-8,000 rpm with direct measuring system and pneumatic clamping Collet Chuck 12kN with integrated pneumatic actuation NC-feeding unit as bar feeder rapid traver: 60m/min stroke: 460mm, depending on fixture Fixed Table with chip pan clamping sur: 30.3" x 11.4" (770 x 290 MM) with thread and locating hole grids: M16 x diameter 15 H7 x 50mm Table Load Cap: 1100 lbs (500kg) Fanuc 18iMB5 5-axis simultaneous CNC Control A-1 Nano High-Speed Contouring 32 tool off-sets Macro B Sub-routines 3-D interpolation/helical interpolation Circular interpolation (360 deg) Rigid Tapping Spindle Orientation memorey capacity: 256KB Drilling Cycles G81 - G89 Absolute pathe measuring sytem M- & T-functions Look ahead Simultaneous prorogramming Auto-corner override 99 tool offsets Cutter radius - contour compensation 48 zero shifts metric/inch S-analogue Oriented spindle stop Slot for PCMCIA Memory Card Interface RS232C Ethernet connection RJ45 Machine diagnosis High speed skip and macro common variables Barfeed Capable Laser Control Prepped for Mist Collector Hydraulics Fixure wash with Flow Control Chip Conveyor 40 Tools Spindle Hours Machine is in near new condition Note: 15,000 RPM Milling spindle option included Originally interfaced for an LNS Bar Feeder, interface included Machine: 108" x 72" x 95" 7,500 lbs Chip Conveyor: 84" x 34" x 30" 1,500 lbs (2) Pallets w/misc: 48" x 48" x 50" 500 lbs each

DESCRIPTION :One used Chiron FZ08K S Magnum 5-Axis Bar-fed Vertical Machining Center With NC Swivel Head

CHIRON Vertical Machining Centre FZ15L - 2m x 400mm X x Y traverse (Fanuc 18i - 2004) - 4 axis (2004)

MACHINE REF :4707

Machines For Sale — . Machining Centre, Vertical

MAKE :CHIRON Vertical Machining Centre

MODEL :FZ15L - 2m x 400mm X x Y traverse (Fanuc 18i - 2004) - 4 axis

YEAR OF MANUFACTURE :2004

SPECIFICATION :Specifications: Table Size: 102" x 17.7" X-Axis Travel: 78.8" Y-Axis Travel: 16" Z-Axis Travel: 16" Rapid Traverse ( X/Y/Z ): 1600 IPM Spindle Taper: CAT 40 Spindle Speeds: . 12,000 RPM Spindle Motor: 30 HP Tool Capacity: 12 ATC Equipped With: Fanuc 18i CNC Control High Pressure Coolant 1000 PSI Fully Enclosed Work Space 4th Axis Interface High Speed Package G68 Coordinate Rotation Koma RN-300RB Rotary Table with Tailstock Chip Conveyor