Set your main menu in Appearance > Menus

Search
Search

Mesta Temper Mill Section TM1001B

Return to Previous Page

Product Description

OM Verticle Lathe 50-85 RM90A
TOS Gear Shaper OHO-20, max ext gear dia 200 mm, max module 4 mm (1975)

Mesta Temper Mill Section TM1001B

 

MACHINE REF :2351

Machines For Sale — . Mill, Miscellaneous

MAKE :Mesta Temper Mill Section TM1001B

SPECIFICATION :92" Mesta Temper Mill Section TM1001B
This equipment was formerly part of a Mesta Four-High Cold Mill in a stainless factory.
18" & 44" Mesta Four-High Cold Mill (Temper Mill).
Housing post size 20" x 24"
Existing work rolls 17" diameter
Existing back up rolls 42" diameter (3 in total)
Distance between the housings 94.5"
There are drawings, although they are somewhat difficult to read. It appears that Mesta “upgraded” the mill in the 1960’s. The motor and gearbox are missing but we had located the components required in used condition for something in the area of $450,000.00 USD The rolls and other items are currently stored in Detroit and appear to be in reasonably good condition.
The housings are stored in IN.
If need be we can put you in touch with a retired engineer formerly with Mesta that is knowledgeable of the equipment design and familiar with the drawings.
Total price: $795,000.00 USD
Shapeline@aol.com

Categories: ,

Description

Mesta Temper Mill Section TM1001B

 

Price: Write Us

Date of Offer :
Location : United States
Quantity : 1
Availability : 17 Jan 2010

Related Products
Quick View
,
WALDRICH SIEGEN Roll Grinder WSF 6 X 4500 (750mm x 4500mm)

WALDRICH SIEGEN Roll Grinder WSF 6 X 4500 (750mm x 4500mm)

 

MACHINE REF : 13035

Machines For Sale — Grinder, Roll

MAKE : WALDRICH SIEGEN Roll Grinder

MODEL : WSF 6 X 4500 (750mm x 4500mm)

SPECIFICATION : Waldrich Siegen Model WSF 6 x 4500 Travelling Table Roll Grinder Maximum diameter over bed 750mm Maximum distance between centres 4,500mm Maximum weight of roll 6,000kg Maximum wheel size 750mm dia. x 65mm wide Year 1978 Serial Number: 12502 Cambering Wheel balancing Journal rests Spare wheel adapters Wheel head motor 11 – 22kw variable speed Work head motor 1.5 – 6kw variable speed Table drive motor 0.7 – 3.7kw variable speed 415v 3 Phase Supply 50hz

DESCRIPTION : price includes loading to transport
Quick View
,
VDF Boehringer Deep Hole Borer 6000m capacity

VDF Boehringer Deep Hole Borer 6000m capacity

 

MACHINE REF : 13037

Machines For Sale — Borer, Deep Hole

MAKE : VDF Boehringer Deep Hole Borer

MODEL : 6000m capacity

SPECIFICATION : VDF Bohringer Deep Hole Borer x 6000mm Year 1975 Swing over bed 620mm Max dia held in roller steadies 275mm Max boring length 6,000mm Headstock 75 kw drive Headstock speeds 35.5 – 1800 rpm Counter rotation Boring bar drive 50kw Counter rotation speeds variable up to 1800 rpm Boring feeds 0 – 200mm/Min. Rapids 3,000mm/Min

DESCRIPTION : complete with 3 point roller steady Oil tank pumps and filters Rear swarf collection baskets and trays with scavenge pump Some bring bars and associated tooling included Loaded to truck
Quick View
,
Floor Plates 3m x 2m x 300mm , price per plate

Floor Plates 3m x 2m x 300mm , price per plate

 

MACHINE REF : 13002

Machines For Sale — Accessories, Floor Plates

MAKE : Floor Plates

MODEL : 3m x 2m x 300mm , price per plate

SPECIFICATION : Make: T CANAL FLOOR PLATES Delivery Time:immediately Freight Basis:ex Work bolster plate floor-plate length ​3​000 mm floor-plate width ​20​00 mm floor-plate height 300 mm Aprox weight ​5 ​T​./1 ​piece​​ 5 off available total ​Plates in very good condition , will be cleaned and oiled at loading time
Quick View
,
OERLIKON Bevel Gear Generator S17 (1980)
OERLIKON Bevel Gear Generator S17 (1980)   ENQUIRY REF : MACHINE REF : 12370365 For Sale -- Gear, Generator MAKE : OERLIKON Bevel Gear Generator MODEL : S17 (1980) - Seller seeking offer MAKE : OERLIKON Bevel Gear Generator MODEL : S17 (1980) - Seller seeking offer Year Of Manufacture 1980
Quick View
,
MAZAK Vertical Machining Centre SVC 2000L/120
MAZAK Vertical Machining Centre SVC 2000L/120   ENQUIRY REF : MACHINE REF : 12358365 For Sale -- Machining Centre, Vertical MAKE : MAZAK Vertical Machining Centre MODEL : SVC 2000L/120 (2005) 5.4m table MAKE : MAZAK Vertical Machining Centre MODEL : SVC 2000L/120 (2005) 5.4m table Controller : 640M Specification : MAZAK SVC 2000L/120 2005 X : 3080mm Y : 510mm Z : 510mm table : 5400mm x 508mm load 3400kg Mazatrol 640M ATC 30 outils SK40 POWER 22kW Year Of Manufacture 2005
Quick View
,
NAKAMURA CNC Turning Centre TW10MM twin spindle, twin turret, C axis, bar loader (1998)

NAKAMURA CNC Turning Centre TW10MM twin spindle, twin turret, C axis, bar loader (1998)

 

MACHINE REF : 13028

Machines For Sale — Lathe, CNC Fixed Head

MAKE : NAKAMURA CNC Turning Centre

MODEL : TW10MM twin spindle, twin turret, C axis, bar loader

YEAR OF MANUFACTURE : 1998

CONTROLLER : FANUC 16TT

SPECIFICATION : NAKAMURA TOME TW-10MM WITH FANUC 16TT Make: Nakamura Model Number: TW-10MM Controller: Fanuc Series 16TT Control SPECIFICATIONS Max Swing Over Bed 8.27 IN Max Turning Diameter 8.26 IN Max Turning Length 6.10 IN Distance B/w Spindle Nose and Turret 3.74 – 11.61 IN Bar Capacity Spindle 1 : 1.65 IN Bar Capacity Spindle 2 : 1.65 IN Spindle Speeds 55 - 5500 RPM Travels ( X Axis) both 7.28 IN Travels ( Z Axis) left / right 7.87 IN / 24.41 IN Turret Type (2) 12 Position Turrets Approx Weight 11,300 Lbs EQUIPPED WITH IEMCA MAGAZINE BAR FEEDER MODEL BOSS 542/37 Twin Turret / Twin Spindle Design Live Milling Capability - All 12 Position both turrets Full C Axis Spindle Rotation (2) Collet Chucks Automatic Parts Catcher RS 232 Port Interface Coolant System Sub Spindle

DESCRIPTION : This machine is in good working order . Sold without live tooling.
Quick View
,
HAUSER Jig Borer, very nice working condition OP 3, table 320×550 mm, XYZ 400x250x400 mm, accessories (1977)

HAUSER Jig Borer, very nice working condition OP 3, table 320x550 mm, XYZ 400x250x400 mm, accessories (1977)

 

MACHINE REF : 13054

Machines For Sale — Borer, Jig

MAKE : HAUSER Jig Borer, very nice working condition

MODEL : OP 3, table 320x550 mm, XYZ 400x250x400 mm, accessories

YEAR OF MANUFACTURE : 1977

CONTROLLER : conventional
Quick View
,
SEDIN Ram Type Vertical Borer, in working condition, FCA – VIDEO AVAILABLE 1516F1, capacity DxH1600x1000 mm, weight 19,2 t, DRO (1980)

SEDIN Ram Type Vertical Borer, in working condition, FCA - VIDEO AVAILABLE 1516F1, capacity DxH1600x1000 mm, weight 19,2 t, DRO (1980)

 

MACHINE REF : 13062

Machines For Sale — Borer, Vertical/VTL Turret

MAKE : SEDIN Ram Type Vertical Borer, in working condition, FCA - VIDEO AVAILABLE

MODEL : 1516F1, capacity DxH1600x1000 mm, weight 19,2 t, DRO

YEAR OF MANUFACTURE : 1980

CONTROLLER : DRO
Quick View
,
MAS Jig Borer – CIF PRICE WKV 100, table 1000×1600 mm, weight 16 t, tooling, attachments

MAS Jig Borer - CIF PRICE WKV 100, table 1000x1600 mm, weight 16 t, tooling, attachments

 

MACHINE REF : 13049

Machines For Sale — Borer, Jig

MAKE : MAS Jig Borer - CIF PRICE

MODEL : WKV 100, table 1000x1600 mm, weight 16 t, tooling, attachments

CONTROLLER : conventional
Quick View
,
PINNACLE VMC 1100S 700x1300mm (2005) (2005)

PINNACLE VMC 1100S 700x1300mm (2005) (2005)

 

MACHINE REF : 13025

Machines For Sale — Machining Centre, Vertical

MAKE : PINNACLE VMC

MODEL : 1100S 700x1300mm (2005)

YEAR OF MANUFACTURE : 2005

CONTROLLER : mitsubishi M65

SPECIFICATION : no ce marking
Quick View
,
BARNAUL Knuckle Joint Press, GO 2000, excellent condition KB8336B, capacity 400 t, table 500×630 mm

BARNAUL Knuckle Joint Press, GO 2000, excellent condition KB8336B, capacity 400 t, table 500x630 mm

 

MACHINE REF : 13051

Machines For Sale — Press, Knuck Joint

MAKE : BARNAUL Knuckle Joint Press, GO 2000, excellent condition

MODEL : KB8336B, capacity 400 t, table 500x630 mm

SPECIFICATION : MANY MORE PICTURES AVAILABLE ON REQUEST.
Quick View
,
You Ji Horizontal Machining Centre HMC 800BP (2012) Twin 800mm pallets, full B axis, Fanuc Oi MD (2012)

You Ji Horizontal Machining Centre HMC 800BP (2012) Twin 800mm pallets, full B axis, Fanuc Oi MD (2012)

 

MACHINE REF : 13044

Machines For Sale — Machining Centre, Horizontal

MAKE : You Ji Horizontal Machining Centre

MODEL : HMC 800BP (2012) Twin 800mm pallets, full B axis, Fanuc Oi MD

YEAR OF MANUFACTURE : 2012

CONTROLLER : Fanuc Oi MD

SPECIFICATION : Youji hmc yr 2012 with 2 pallet Table size 800 x 800 , speed 10,000 spindle bt-50, atc -40, table index 0.001 degrees spindle thru coolant

DESCRIPTION : Very good working order FOB Port price
Quick View
,
RYAZAN Heavy Duty Centre Lathe RT2503, capacity DxL 630×1000 mm

RYAZAN Heavy Duty Centre Lathe RT2503, capacity DxL 630x1000 mm

 

MACHINE REF : 13041

Machines For Sale — Lathe, Conventional >=2m b/c

MAKE : RYAZAN Heavy Duty Centre Lathe

MODEL : RT2503, capacity DxL 630x1000 mm

CONTROLLER : conventional
Quick View
,
PARMIGIANI CNC 4-rolls Plate Bending Rolls VBH-3100/40, capacity 40×3100 mm

PARMIGIANI CNC 4-rolls Plate Bending Rolls VBH-3100/40, capacity 40x3100 mm

 

MACHINE REF : 13018

Machines For Sale — Sheet Metal & Plate, Bending Rolls

MAKE : PARMIGIANI CNC 4-rolls Plate Bending Rolls

MODEL : VBH-3100/40, capacity 40x3100 mm

CONTROLLER : CNC
Quick View
,
SIP Jig Borer SIP Hydroptic 8P 1.56m x 1.02m table, 3 axis DRO

SIP Jig Borer SIP Hydroptic 8P 1.56m x 1.02m table, 3 axis DRO

 

MACHINE REF : 13036

Machines For Sale — Borer, Jig

MAKE : SIP Jig Borer

MODEL : SIP Hydroptic 8P 1.56m x 1.02m table, 3 axis DRO

SPECIFICATION : Societe Genevoise SIP Hydroptic 8P Twin Column Jig Boring Machine with Vertical Spindle, Horizontal Side Head & 3 Axis DRO. Table Area 1560mm x 1020mm. With SIP PD-6H 800mm Rotary Table. Approx Distance Between Columns 1250mm. Approx Max Distance from Table Top to Under Cross Rail 1150mm.
Quick View
,
MIKROSA Centreless Grinder, good condition, complete SASL 200×500.06 (1984)

MIKROSA Centreless Grinder, good condition, complete SASL 200x500.06 (1984)

 

MACHINE REF : 13057

Machines For Sale — Grinder, Centreless

MAKE : MIKROSA Centreless Grinder, good condition, complete

MODEL : SASL 200x500.06

YEAR OF MANUFACTURE : 1984
Quick View
,
SNOW Surface Grinder OS 96
SNOW Surface Grinder OS 96   ENQUIRY REF : MACHINE REF : 12361365 For Sale -- Grinder, Surface Recip Table MAKE : SNOW Surface Grinder MODEL : OS 96 - 2.9m x 460mm x 700mm (vert) , twin 500mm x 1200mm tables MAKE : SNOW Surface Grinder MODEL : OS 96 - 2.9m x 460mm x 700mm (vert) , twin 500mm x 1200mm tables Specification : PRICE INCLUDES LOADING TO TRUCK With lot of grinding wheels
Quick View
,
SEDIN Ram Type Vertical Borer 1510, capacity DxH 1000×800 mm

SEDIN Ram Type Vertical Borer 1510, capacity DxH 1000x800 mm

 

MACHINE REF : 13071

Machines For Sale — Borer, Vertical/VTL Turret

MAKE : SEDIN Ram Type Vertical Borer

MODEL : 1510, capacity DxH 1000x800 mm

CONTROLLER : conventional
Quick View
,
TOS HOSTIVAR Universal Cylindrical Grinder BUC 63A, capacity DxL 630×3000 mm (1983)

TOS HOSTIVAR Universal Cylindrical Grinder BUC 63A, capacity DxL 630x3000 mm (1983)

 

MACHINE REF : 13064

Machines For Sale — Grinder, Cylindrical Universal

MAKE : TOS HOSTIVAR Universal Cylindrical Grinder

MODEL : BUC 63A, capacity DxL 630x3000 mm

YEAR OF MANUFACTURE : 1983

CONTROLLER : conventional
Quick View
,
RYAZAN 3-Rolls Plate Bending Rolls – exloaded IB2222, capacity 16×2000 mm

RYAZAN 3-Rolls Plate Bending Rolls - exloaded IB2222, capacity 16x2000 mm

 

MACHINE REF : 13039

Machines For Sale — Sheet Metal & Plate, Bending Rolls

MAKE : RYAZAN 3-Rolls Plate Bending Rolls - exloaded

MODEL : IB2222, capacity 16x2000 mm
Quick View
,
TITAN Ram/Turret Type Vertical Borer SC17, capacity DxH 1650×1200 mm (1977)

TITAN Ram/Turret Type Vertical Borer SC17, capacity DxH 1650x1200 mm (1977)

 

MACHINE REF : 13074

Machines For Sale — Borer, Vertical/VTL Turret

MAKE : TITAN Ram/Turret Type Vertical Borer

MODEL : SC17, capacity DxH 1650x1200 mm

YEAR OF MANUFACTURE : 1977

CONTROLLER : conventional
Quick View
,
CHIMKENT Screw Press – VIDEO F1736, capacity 400 t, table 780×880 mm

CHIMKENT Screw Press - VIDEO F1736, capacity 400 t, table 780x880 mm

 

MACHINE REF : 13053

Machines For Sale — Press, Screw

MAKE : CHIMKENT Screw Press - VIDEO

MODEL : F1736, capacity 400 t, table 780x880 mm

SPECIFICATION : Nominal effort 4000 kN, Ram stroke 450 mm, Distance b/n ram and table 450 mm, Number of strokes per minute 30, Table size 780x880 mm, Main motor power 50 kW, Overall dimensions LxWxH 4400x2360x5500 mm, Weight 30 t
Quick View
,
TORNOS CNC sliding head lathe GAMMA 20/6 – 2010 (8 axis) with bar loader and tooling – Fanuc (2010)

TORNOS CNC sliding head lathe GAMMA 20/6 - 2010 (8 axis) with bar loader and tooling - Fanuc (2010)

 

MACHINE REF : 13031

Machines For Sale — Lathe, CNC Sliding Head

MAKE : TORNOS CNC sliding head lathe

MODEL : GAMMA 20/6 - 2010 (8 axis) with bar loader and tooling - Fanuc

YEAR OF MANUFACTURE : 2010

CONTROLLER : FANUC 31i - A

SPECIFICATION : 3-20mm bar cap 10000rpm Subpindle and main spindle with C axes Bar loader 20000 Hours approx "powered on" time, approx 4500 hrs cutting time

DESCRIPTION : Excellent condition, under power in factory
Quick View
,
HYUNDAI KIA Drill tap VX380T (2010) (2010)

HYUNDAI KIA Drill tap VX380T (2010) (2010)

 

MACHINE REF : 13032

Machines For Sale — Drill/Tap, CNC

MAKE : HYUNDAI KIA Drill tap

MODEL : VX380T (2010)

YEAR OF MANUFACTURE : 2010

CONTROLLER : Mitsubishi M70

SPECIFICATION : Specs available on request in PDF
Quick View
,
WMW NILES Gear Grinder – VIDEO ZSTZ 800, gear dia 800 mm, module 14, weight 9 t, change gears

WMW NILES Gear Grinder - VIDEO ZSTZ 800, gear dia 800 mm, module 14, weight 9 t, change gears

 

MACHINE REF : 13070

Machines For Sale — Gear, Grinder

MAKE : WMW NILES Gear Grinder - VIDEO

MODEL : ZSTZ 800, gear dia 800 mm, module 14, weight 9 t, change gears

CONTROLLER : conventional
Quick View
,
NILES-MAGDEBURG Heavy Duty Lathe DP 3/3×20000, capacity DxL 2500×20000 mm, 3 off steadies (1979)

NILES-MAGDEBURG Heavy Duty Lathe DP 3/3x20000, capacity DxL 2500x20000 mm, 3 off steadies (1979)

 

MACHINE REF : 13015

Machines For Sale — Lathe, Conventional >=2m b/c

MAKE : NILES-MAGDEBURG Heavy Duty Lathe

MODEL : DP 3/3x20000, capacity DxL 2500x20000 mm, 3 off steadies

YEAR OF MANUFACTURE : 1979

CONTROLLER : conventional

SPECIFICATION : Swing over bed 2500 mm, Swing over cross slide 2000 mm, Swing in gap 3500 mm, Distance b/n centres 20000 mm, Max workpiece weight 30000 kg, Faceplate diameter 2500 mm Spindle diameter 100 mm, Spindle speeds range 0,45-140 rpm, Total power requirement 60 kW, Weight, ca. 64000 kg, 3 off steadies
Quick View
,
PIESOK Guillotine Shear (1995) CNTA 3150/10A
PIESOK Guillotine Shear (1995) CNTA 3150/10A   ENQUIRY REF : MACHINE REF : 12391365 For Sale -- Sheet Metal & Plate, Shear/Guillotine MAKE : PIESOK Guillotine Shear (1995) MODEL : CNTA 3150/10A, capacity 10x3150 mm, weight 11500 kg MAKE : PIESOK Guillotine Shear (1995) MODEL : CNTA 3150/10A, capacity 10x3150 mm, weight 11500 kg Controller : conventional Year Of Manufacture 1995 PRICE : 16500 EUR (Prices are quoted for machines ex works, not loaded to transport, unless otherwise agreed.) Machines are offered subject to prior sale and payment terms are 100% cleared funds against invoice and before removal unless otherwise agreed. We reserve the right to change price and amend specifications without prior notice and cannot be held responsible for any errors contained in the data herein. It is recommended that specifications and other factual data are checked before purchase.
Quick View
,
MIKROSA Centreless Grinder, good condition, complete – 2OFF AVAILABLE SASL 400/1

MIKROSA Centreless Grinder, good condition, complete - 2OFF AVAILABLE SASL 400/1

 

MACHINE REF : 13066

Machines For Sale — Grinder, Centreless

MAKE : MIKROSA Centreless Grinder, good condition, complete - 2OFF AVAILABLE

MODEL : SASL 400/1

CONTROLLER : conventional
Quick View
,
AKYAPAK 4-rolls Plate Bending Rolls AHS 30/40, capacity 50×3150 mm

AKYAPAK 4-rolls Plate Bending Rolls AHS 30/40, capacity 50x3150 mm

 

MACHINE REF : 13017

Machines For Sale — Sheet Metal & Plate, Bending Rolls

MAKE : AKYAPAK 4-rolls Plate Bending Rolls

MODEL : AHS 30/40, capacity 50x3150 mm
Quick View
,
MONZESI ROSSI MONZA 400

MONZESI ROSSI MONZA 400

 

MACHINE REF : 13024

Machines For Sale — Grinder, Centreless

MAKE : MONZESI ROSSI MONZA

MODEL : 400

SPECIFICATION : MACHINE UNDER POWER GOOD WORKING CONDITION,HYDRAULIC PLANT NEW

DESCRIPTION : min workpieces diam 3 mm max workpieces diam 100 mm working grinding wheels dimension: 406 x 204 x 152 mm driving grinding wheels dimension: 254 x 204 x 115 mm
Quick View
,
KRAMATORSK Heavy Duty Centre Lathe 1A665, capacity DxL 1600×8000 mm

KRAMATORSK Heavy Duty Centre Lathe 1A665, capacity DxL 1600x8000 mm

 

MACHINE REF : 13052

Machines For Sale — Lathe, Conventional >=2m b/c

MAKE : KRAMATORSK Heavy Duty Centre Lathe

MODEL : 1A665, capacity DxL 1600x8000 mm

CONTROLLER : conventional

SPECIFICATION : Good mechanics, electrics need revision.
Quick View
,
TOYODA CNC Cylindrical Grinder GL7P (1999) 1m x 300mm with Marposs Gauging (1999)

TOYODA CNC Cylindrical Grinder GL7P (1999) 1m x 300mm with Marposs Gauging (1999)

 

MACHINE REF : 13007

Machines For Sale — Grinder, Cylindrical CNC

MAKE : TOYODA CNC Cylindrical Grinder

MODEL : GL7P (1999) 1m x 300mm with Marposs Gauging

YEAR OF MANUFACTURE : 1999

SPECIFICATION : TOYODA GL7P 100 YOM 1999 Serial Number RC-7485 Swing 400 mm Distance between centers 1000 mm Maxi grinding diameter 300 mm Workpiece diameter 300 kg System Marposs for measuring diameter Automatic rest Maxi grinding wheel diameter 915 mm Diameter grinding wheel bore 304,8 mm Max wheel diameter 160 mm Surface speed 45 m/s Travel X 1172,3 mm Rapid speed 15000 mm/min Spindle speed 32 à 630 t/min Power grinding wheel engine 22 Kw Filtration 350 l Machine dimension : 4400 x 3900 mm Weight 10300 Kg

DESCRIPTION : Seeking offers for quick deal
Quick View
,
NILES Gear Grinder – VIDEO ZSTZ 630 C2, gear dia 630 mm, module 12, weight 6,5 t, change gears

NILES Gear Grinder - VIDEO ZSTZ 630 C2, gear dia 630 mm, module 12, weight 6,5 t, change gears

 

MACHINE REF : 13069

Machines For Sale — Gear, Grinder

MAKE : NILES Gear Grinder - VIDEO

MODEL : ZSTZ 630 C2, gear dia 630 mm, module 12, weight 6,5 t, change gears

CONTROLLER : conventional
Quick View
,
CHIRON Machining Centre FZ12W with Fanuc 21m

CHIRON Machining Centre FZ12W with Fanuc 21m

 

MACHINE REF : 13046

Machines For Sale — Machining Centre, Vertical

MAKE : CHIRON Machining Centre

MODEL : FZ12W with Fanuc 21m

CONTROLLER : Fanuc 21m

DESCRIPTION : seller seeking offers
Quick View
,
MAZAK CNC Lathe QUICK TURN 200C (1998) good working order

MAZAK CNC Lathe QUICK TURN 200C (1998) good working order

 

MACHINE REF : 13026

Machines For Sale — Lathe, CNC Fixed Head

MAKE : MAZAK CNC Lathe

MODEL : QUICK TURN 200C (1998) good working order

DESCRIPTION : price negotiable
Quick View
,
2 off TOS Crankshaft Grinders BEK 80 and FEK 80

2 off TOS Crankshaft Grinders BEK 80 and FEK 80

 

MACHINE REF : 13056

Machines For Sale — Grinder, Crankshaft

MAKE : 2 off TOS Crankshaft Grinders

MODEL : BEK 80 and FEK 80

DESCRIPTION : Price for pair, seller will split
Quick View
,
CITIZEN CNC sliding head lathe L32 VII (2004)
CITIZEN CNC sliding head lathe L32 VII (2004)   ENQUIRY REF : MACHINE REF : 12363365 For Sale -- Lathe, CNC Sliding Head MAKE : CITIZEN CNC sliding head lathe MODEL : L32 VII (2004) with long parts adaptor and subspindle MAKE : CITIZEN CNC sliding head lathe MODEL : L32 VII (2004) with long parts adaptor and subspindle Controller : CINCOM Description : The machine has been serviced every year by Citizen on their CMSure service. ** NOTE: This machine will not be available for delivery until April 2017. The machine can be secured with a deposit and the balance paid before delivery. Specification : Serial No.: V13119 Year: 2004 Main Spindle: 5 turning tool positions, 4 side power driven tools, 4 static end working tools, Sub Spindle: 3 Static end working tools, The machine also comes with a single front/back end working power tool. Long parts gantry arm fitted (hence the three positions on the sub spindle), Coolblaster High Pressure Coolant. The coolblaster has 4 high pressure lines, one through the subspindle, the others through the tooling on the platen and subspindle tools, Absolent Fume extractor, Swarf conveyor, IEMCA BOSS 332/E/R magazine bar feed, Year Of Manufacture 2004
Quick View
,
FEELER Vertical Machining Centre FV-1200
FEELER Vertical Machining Centre FV-1200   ENQUIRY REF : MACHINE REF : 12387365 For Sale -- Machining Centre, Vertical MAKE : FEELER Vertical Machining Centre, very nice, visible under power, video possible MODEL : FV-1200 A, table 1300x600 mm, XYZ 1200x565x655 mm, 4th axis indexing head MAKE : FEELER Vertical Machining Centre, very nice, visible under power, video possible MODEL : FV-1200 A, table 1300x600 mm, XYZ 1200x565x655 mm, 4th axis indexing head Controller : FANUC 0-M Specification : X: 1200 mm, Y: 565 mm, Z: 655 mm, Table: 1300 x 600 mm, Range of spindle speeds: 6 000 rpm, Tool magazine: 24 pcs, Tool holder: BT 40, FANUC 0-M controller, 4th axis indexing head Year Of Manufacture 1997
Quick View
,
HAAS Vertical Machining Centre WF4 – twin pallet (2005) (2005)

HAAS Vertical Machining Centre WF4 - twin pallet (2005) (2005)

 

MACHINE REF : 13076

Machines For Sale — Machining Centre, Vertical

MAKE : HAAS Vertical Machining Centre

MODEL : WF4 - twin pallet (2005)

YEAR OF MANUFACTURE : 2005

CONTROLLER : HAAS

DESCRIPTION : Faulty vector drive
Quick View
,
CITIZEN Sliding Head Lathe M32 iii (2006) with live tools and bar loader, FOB price (2007)

CITIZEN Sliding Head Lathe M32 iii (2006) with live tools and bar loader, FOB price (2007)

 

MACHINE REF : 13027

Machines For Sale — Lathe, CNC Sliding Head

MAKE : CITIZEN Sliding Head Lathe

MODEL : M32 iii (2006) with live tools and bar loader, FOB price

YEAR OF MANUFACTURE : 2007

SPECIFICATION : Citizen M32 III new 2006 , with Iemca Barfeed BOSS 332 Bar Feed Swarf conveyor Swarf bin High-pressure coolant unit 1x 3 position endworking tool holder for the turret 1x 2 position external turning tool holder for the turret Assortment of spares and accessories Documentation

DESCRIPTION : FOB PORT
Quick View
,
LVD Press brake PPN 180/40 – 4000mm x 180t with tooling, 1981 (1981)

LVD Press brake PPN 180/40 - 4000mm x 180t with tooling, 1981 (1981)

 

MACHINE REF : 13004

Machines For Sale — Sheet Metal & Plate, Press Brake

MAKE : LVD Press brake

MODEL : PPN 180/40 - 4000mm x 180t with tooling, 1981

YEAR OF MANUFACTURE : 1981

Placeholder
Quick View
,
SEDIN Ram Type Vertical Borers – 2off in lot, price for lot ExW 1508, DxH 800×800 mm, 9,5 t AND 1510, DxH 1000×800 mm, 10,5 t

SEDIN Ram Type Vertical Borers - 2off in lot, price for lot ExW 1508, DxH 800x800 mm, 9,5 t AND 1510, DxH 1000x800 mm, 10,5 t

 

MACHINE REF : 13063

Machines For Sale — Borer, Vertical/VTL Turret

MAKE : SEDIN Ram Type Vertical Borers - 2off in lot, price for lot ExW

MODEL : 1508, DxH 800x800 mm, 9,5 t AND 1510, DxH 1000x800 mm, 10,5 t

CONTROLLER : conventional
Quick View
,
AMADA Laser Cutter (2012), 12500 work hours FO MII 3015 NT, 4 kW, table 1500×3000 mm (2012)

AMADA Laser Cutter (2012), 12500 work hours FO MII 3015 NT, 4 kW, table 1500x3000 mm (2012)

 

MACHINE REF : 13021

Machines For Sale — Sheet Metal & Plate, Laser Cutter

MAKE : AMADA Laser Cutter (2012), 12500 work hours

MODEL : FO MII 3015 NT, 4 kW, table 1500x3000 mm

YEAR OF MANUFACTURE : 2012

CONTROLLER : AMADA AMNC-F

SPECIFICATION : Axis travel X= 3420 Y=1550 Z=200mm Cutting area 3070mm x 1550mm Cutting feedrate 0-20m/min Max.rapid feed 80m/min X and Y 60m/min Z axis Max worksheet weight 920 KG CNC control Amada AMNC-F 15in colour touch screen. Laser rated output 4000w Table height 840mm Total Power HP/KW 62kVa Overall size: 9625 x 2500 x 2218mm Weight: 10.5 tons

DESCRIPTION : 12500 work hours
Quick View
,
TRUMPF Laser Cutter (2006), under power, hours 40670 / 19512 – EXLOADED TRUMATIC 4030, 4000W, XYZ 4000x2000x112 mm (2006)

TRUMPF Laser Cutter (2006), under power, hours 40670 / 19512 - EXLOADED TRUMATIC 4030, 4000W, XYZ 4000x2000x112 mm (2006)

 

MACHINE REF : 13013

Machines For Sale — Sheet Metal & Plate, Laser Cutter

MAKE : TRUMPF Laser Cutter (2006), under power, hours 40670 / 19512 - EXLOADED

MODEL : TRUMATIC 4030, 4000W, XYZ 4000x2000x112 mm

YEAR OF MANUFACTURE : 2006

CONTROLLER : SIEMENS SINUMERIK 840 D

SPECIFICATION : Laser Power : 4000W Working Area: 4000 x 2000 x 112 mm Work area : in X direction 4000 mm in Y direction 2000 mm in Z direction 112 mm Max. Sheet Thickness: 20 mm Accuracy: 0,01 mm SPEED Max. positioning speed axially parallel 60 m/min simultaneous 85 m/min Dimensions : Lenght 11600 mm Width 5200 mm Height 2000 mm Total weight approx. 16000 kg

DESCRIPTION : Laser ON :40670, Beam ON:19512; This laser is in good technical condition and under power.
Quick View
,
CENTURION EUROPA UNIVERSAL Milling Machine CU6-CNC
CENTURION EUROPA UNIVERSAL Milling Machine CU6-CNC   ENQUIRY REF : MACHINE REF : 12367365 For Sale -- Mill, Vertical CNC MAKE : CENTURION EUROPA UNIVERSAL Milling Machine MODEL : CU6-CNC 2m bed , Heidenhain Control (1998) MAKE : CENTURION EUROPA UNIVERSAL Milling Machine MODEL : CU6-CNC 2m bed , Heidenhain Control (1998) Specification : Europa, included some toolin, Speed adjuster, Adapter for different size tooling, table unmarked, very clean, Hidenhain control, Spindel " OFF" button on control panel not working, 2 metre bed, X1500, Y 700
Quick View
,
TOS HULIN CNC Turret Type Vertical Borer (1998), visible under power SKI 12 CNC, capacity DxH 1600×1200 mm (1998)

TOS HULIN CNC Turret Type Vertical Borer (1998), visible under power SKI 12 CNC, capacity DxH 1600x1200 mm (1998)

 

MACHINE REF : 13014

Machines For Sale — Borer, Vertical/VTL Turret CNC

MAKE : TOS HULIN CNC Turret Type Vertical Borer (1998), visible under power

MODEL : SKI 12 CNC, capacity DxH 1600x1200 mm

YEAR OF MANUFACTURE : 1998

CONTROLLER : SIEMENS SINUMERIK

SPECIFICATION : Faceplate diameter .......................................... 1200 mm, swing diameter................................................. 1600 mm, turning height .................................................. 1200 mm, max. ram stroke ............................................... 1100 mm, Tools ................................................................. 4

DESCRIPTION : The machine is in very good technical condition and under power.
Quick View
,
SEDIN Ram Type Vertical Borer, in working condition – VIDEO AVAILABLE 1L532, capacity DxH 3150×1600 mm (1979)

SEDIN Ram Type Vertical Borer, in working condition - VIDEO AVAILABLE 1L532, capacity DxH 3150x1600 mm (1979)

 

MACHINE REF : 13061

Machines For Sale — Borer, Vertical/VTL Ram Type

MAKE : SEDIN Ram Type Vertical Borer, in working condition - VIDEO AVAILABLE

MODEL : 1L532, capacity DxH 3150x1600 mm

YEAR OF MANUFACTURE : 1979

CONTROLLER : conventional
Quick View
,
TITAN Ram/Turret Type Vertical Borer, missings in electrics SC17, capacity DxH 1650×1200 mm

TITAN Ram/Turret Type Vertical Borer, missings in electrics SC17, capacity DxH 1650x1200 mm

 

MACHINE REF : 13068

Machines For Sale — Borer, Vertical/VTL Turret

MAKE : TITAN Ram/Turret Type Vertical Borer, missings in electrics

MODEL : SC17, capacity DxH 1650x1200 mm

CONTROLLER : conventional
Quick View
,
SEDIN Ram Type Vertical Borer, in working condition 1525, capacity DxH 2500×1600 mm (1984)

SEDIN Ram Type Vertical Borer, in working condition 1525, capacity DxH 2500x1600 mm (1984)

 

MACHINE REF : 13050

Machines For Sale — Borer, Vertical/VTL Ram Type

MAKE : SEDIN Ram Type Vertical Borer, in working condition

MODEL : 1525, capacity DxH 2500x1600 mm

YEAR OF MANUFACTURE : 1984

CONTROLLER : conventional
Quick View
,
DAEWOO Twin Pallet HMC DMH500 (1998) – fanuc 16m control (1998)

DAEWOO Twin Pallet HMC DMH500 (1998) - fanuc 16m control (1998)

 

MACHINE REF : 13030

Machines For Sale — Machining Centre, Horizontal

MAKE : DAEWOO Twin Pallet HMC

MODEL : DMH500 (1998) - fanuc 16m control

YEAR OF MANUFACTURE : 1998

DESCRIPTION : loaded to container price

About Swissware.tools
Swissware.tools Machinery Marketplace.
Chaltenbodenstrasse 6D
8834 Schindellegi
Schwytz
Phone: 0041 79 953 47 29
Email: grant@swissware.tools
www.swissware.tools

Copyright by swissware.tools 2012-2017

close