Set your main menu in Appearance > Menus

Search
Search

MORI SEIKI 4-axis Vertical Machining Centre With Pallet System (1995), excellent MV55/50, table 55”x21.7” (1400×550 mm), XYZ 41.3”x21.7”x22” (1050x550x560 mm) (1995)

Return to Previous Page

Product Description

MAKINO 4-axis Vertical Machining Centre (1986), excellent condition, VIDEO FNC 106-A20, table 65”x33” (1650x840 mm), XYZ 41”x26”x22” (1040x660x560 mm) (1986)
WANTED: Vertical Machining Centre XYZ 1500x900x800 mm, spindle 6000 rpm, Heidenhain, Siemens, Fanuc

MORI SEIKI 4-axis Vertical Machining Centre With Pallet System (1995), excellent MV55/50, table 55”x21.7” (1400×550 mm), XYZ 41.3”x21.7”x22” (1050x550x560 mm) (1995)

 

MACHINE REF :12126

Machines For Sale — . Machining Centre, Vertical

MAKE :MORI SEIKI 4-axis Vertical Machining Centre With Pallet System (1995), excellent

MODEL :MV55/50, table 55”x21.7” (1400×550 mm), XYZ 41.3”x21.7”x22” (1050x550x560 mm)

YEAR OF MANUFACTURE :1995

CONTROLLER :MORI MF-M6

SPECIFICATION :Travels: 41.3” x 21.7” x 22”
Table size: 55” x 21.7”
Pallet size: 40” x 19” each
Max/min distance spindle nose to table: 7.9 ‘ to 29.9”
Spindle taper: BT 50
Spindle speeds: 40 to 4,000 rpm
Max. weight on table: 3,300#
Spindle center to column: 23.6”
Spindle HP: 15/10 HP
Rapid feed rates: X & Y & Z: 590 IPM on X & Y, 472 IPM on Z
Cutting feed rates: 1 to 197 ipm
ATC: 30 place
Wired: 220V/3ph/60 cy
Weight: Approximately 22,000#
Dimensions: (Floor space) 140” x 143” x 119.5” (shipping height: 107.1”)

FURTHER SPECIFICATION :EQUIPPED WITH:
Mori MF-M6 controls (Fanuc 16M) with recent new CRT and Video Module
Extra Offsets, Macros
4th axis drive installed (at one time they were using a Tsudakoma rotary)
DIN Coolant thru tool with 2) BT 50 Speed Inducer Tool holders
Approximately (60) total BT 50 tool holders
Coolant system with 66 gallon capacity
Chip removal Paddles at rear of table
Signal Tower
Work Light
Full enclosures with full covers
Front doors interlock system
Side door for tool insertions has door interlock
Chiller
Transformer
Heavy duty Linear ways on X & Y axis with 45 mm diameter ball screws
Midaco Md. 40SD dual pallet changer with Auto Door separation and (2) 40” x 19” pallets
Midaco web link: http://www.midaco-corp.com/pdfs/Automatic%20Brochure%202013%20for%20website.pdf
Manuals:
Mori Seiki: 2) Electrical
Electrical Diagram
2) Maintenance
Parts
Parameters
Fanuc:
Parameter (2)
Maintenance
Operators

DESCRIPTION :Condition is Excellent!
The only reason it was sold was to make room for a 50” travel in X, VMC.
Special note: This is not a typical VMC with Pallet changer; you can use it without any pallets because it still is basically a factory standard VMC with its own table. Not one with a dedicated APC and no table with just pallets.

Categories: ,

Description

MORI SEIKI 4-axis Vertical Machining Centre With Pallet System (1995), excellent MV55/50, table 55”x21.7” (1400×550 mm), XYZ 41.3”x21.7”x22” (1050x550x560 mm) (1995)

 

Price: Write Us

Date of Offer :
Location : United States
Quantity : 1
Availability : 19 Oct 2016

Related Products
Quick View
,
SEDIN Ram Type Vertical Borer, in working condition, FCA – VIDEO AVAILABLE 1516F1, capacity DxH1600x1000 mm, weight 19,2 t, DRO (1980)

SEDIN Ram Type Vertical Borer, in working condition, FCA - VIDEO AVAILABLE 1516F1, capacity DxH1600x1000 mm, weight 19,2 t, DRO (1980)

 

MACHINE REF : 13062

Machines For Sale — Borer, Vertical/VTL Turret

MAKE : SEDIN Ram Type Vertical Borer, in working condition, FCA - VIDEO AVAILABLE

MODEL : 1516F1, capacity DxH1600x1000 mm, weight 19,2 t, DRO

YEAR OF MANUFACTURE : 1980

CONTROLLER : DRO
Quick View
,
FEELER Vertical Machining Centre FV-1200
FEELER Vertical Machining Centre FV-1200   ENQUIRY REF : MACHINE REF : 12387365 For Sale -- Machining Centre, Vertical MAKE : FEELER Vertical Machining Centre, very nice, visible under power, video possible MODEL : FV-1200 A, table 1300x600 mm, XYZ 1200x565x655 mm, 4th axis indexing head MAKE : FEELER Vertical Machining Centre, very nice, visible under power, video possible MODEL : FV-1200 A, table 1300x600 mm, XYZ 1200x565x655 mm, 4th axis indexing head Controller : FANUC 0-M Specification : X: 1200 mm, Y: 565 mm, Z: 655 mm, Table: 1300 x 600 mm, Range of spindle speeds: 6 000 rpm, Tool magazine: 24 pcs, Tool holder: BT 40, FANUC 0-M controller, 4th axis indexing head Year Of Manufacture 1997
Quick View
,
SNOW Surface Grinder OS 96
SNOW Surface Grinder OS 96   ENQUIRY REF : MACHINE REF : 12361365 For Sale -- Grinder, Surface Recip Table MAKE : SNOW Surface Grinder MODEL : OS 96 - 2.9m x 460mm x 700mm (vert) , twin 500mm x 1200mm tables MAKE : SNOW Surface Grinder MODEL : OS 96 - 2.9m x 460mm x 700mm (vert) , twin 500mm x 1200mm tables Specification : PRICE INCLUDES LOADING TO TRUCK With lot of grinding wheels
Quick View
,
PARMIGIANI CNC 4-rolls Plate Bending Rolls VBH-3100/40, capacity 40×3100 mm

PARMIGIANI CNC 4-rolls Plate Bending Rolls VBH-3100/40, capacity 40x3100 mm

 

MACHINE REF : 13018

Machines For Sale — Sheet Metal & Plate, Bending Rolls

MAKE : PARMIGIANI CNC 4-rolls Plate Bending Rolls

MODEL : VBH-3100/40, capacity 40x3100 mm

CONTROLLER : CNC
Quick View
,
TOS Table Type Horizontal Borer with facing head and tailstock, very nice W100, spindle 100 mm, table 1250×1250 mm, XYZW 1600x1120x1250x900 mm

TOS Table Type Horizontal Borer with facing head and tailstock, very nice W100, spindle 100 mm, table 1250x1250 mm, XYZW 1600x1120x1250x900 mm

 

MACHINE REF : 13012

Machines For Sale — Borer, Horizontal Table

MAKE : TOS Table Type Horizontal Borer with facing head and tailstock, very nice

MODEL : W100, spindle 100 mm, table 1250x1250 mm, XYZW 1600x1120x1250x900 mm

CONTROLLER : conventional
Quick View
,
KIA CNC Lathe KIATURN 21 – 1998 with Yasnac control and Bar loader (1998)

KIA CNC Lathe KIATURN 21 - 1998 with Yasnac control and Bar loader (1998)

 

MACHINE REF : 13043

Machines For Sale — Lathe, CNC Fixed Head

MAKE : KIA CNC Lathe

MODEL : KIATURN 21 - 1998 with Yasnac control and Bar loader

YEAR OF MANUFACTURE : 1998

SPECIFICATION : GOOD WORKING ORDER
Quick View
,
MAZAK CNC Lathe QUICK TURN 200C (1998) good working order

MAZAK CNC Lathe QUICK TURN 200C (1998) good working order

 

MACHINE REF : 13026

Machines For Sale — Lathe, CNC Fixed Head

MAKE : MAZAK CNC Lathe

MODEL : QUICK TURN 200C (1998) good working order

DESCRIPTION : price negotiable
Quick View
,
MIKROSA Centreless Grinder, good condition, complete SASL 200×500.06 (1984)

MIKROSA Centreless Grinder, good condition, complete SASL 200x500.06 (1984)

 

MACHINE REF : 13057

Machines For Sale — Grinder, Centreless

MAKE : MIKROSA Centreless Grinder, good condition, complete

MODEL : SASL 200x500.06

YEAR OF MANUFACTURE : 1984
Quick View
,
GWO LIAN Wire Drawing Line, used 3 months only HCDR-800-TD, wire class B500C, wire dia range 5-12 mm, capacity 20000 t/year (2007)

GWO LIAN Wire Drawing Line, used 3 months only HCDR-800-TD, wire class B500C, wire dia range 5-12 mm, capacity 20000 t/year (2007)

 

MACHINE REF : 13067

Machines For Sale — Wire, Drawing and Making

MAKE : GWO LIAN Wire Drawing Line, used 3 months only

MODEL : HCDR-800-TD, wire class B500C, wire dia range 5-12 mm, capacity 20000 t/year

YEAR OF MANUFACTURE : 2007
Quick View
,
NILES Gear Grinder – VIDEO ZSTZ 630 C2, gear dia 630 mm, module 12, weight 6,5 t, change gears

NILES Gear Grinder - VIDEO ZSTZ 630 C2, gear dia 630 mm, module 12, weight 6,5 t, change gears

 

MACHINE REF : 13069

Machines For Sale — Gear, Grinder

MAKE : NILES Gear Grinder - VIDEO

MODEL : ZSTZ 630 C2, gear dia 630 mm, module 12, weight 6,5 t, change gears

CONTROLLER : conventional
Quick View
,
CHIMKENT Screw Press – VIDEO F1736, capacity 400 t, table 780×880 mm

CHIMKENT Screw Press - VIDEO F1736, capacity 400 t, table 780x880 mm

 

MACHINE REF : 13053

Machines For Sale — Press, Screw

MAKE : CHIMKENT Screw Press - VIDEO

MODEL : F1736, capacity 400 t, table 780x880 mm

SPECIFICATION : Nominal effort 4000 kN, Ram stroke 450 mm, Distance b/n ram and table 450 mm, Number of strokes per minute 30, Table size 780x880 mm, Main motor power 50 kW, Overall dimensions LxWxH 4400x2360x5500 mm, Weight 30 t
Quick View
,
CENTURION EUROPA UNIVERSAL Milling Machine CU6-CNC
CENTURION EUROPA UNIVERSAL Milling Machine CU6-CNC   ENQUIRY REF : MACHINE REF : 12367365 For Sale -- Mill, Vertical CNC MAKE : CENTURION EUROPA UNIVERSAL Milling Machine MODEL : CU6-CNC 2m bed , Heidenhain Control (1998) MAKE : CENTURION EUROPA UNIVERSAL Milling Machine MODEL : CU6-CNC 2m bed , Heidenhain Control (1998) Specification : Europa, included some toolin, Speed adjuster, Adapter for different size tooling, table unmarked, very clean, Hidenhain control, Spindel " OFF" button on control panel not working, 2 metre bed, X1500, Y 700
Quick View
,
Floor Plates 3m x 2m x 300mm , price per plate

Floor Plates 3m x 2m x 300mm , price per plate

 

MACHINE REF : 13002

Machines For Sale — Accessories, Floor Plates

MAKE : Floor Plates

MODEL : 3m x 2m x 300mm , price per plate

SPECIFICATION : Make: T CANAL FLOOR PLATES Delivery Time:immediately Freight Basis:ex Work bolster plate floor-plate length ​3​000 mm floor-plate width ​20​00 mm floor-plate height 300 mm Aprox weight ​5 ​T​./1 ​piece​​ 5 off available total ​Plates in very good condition , will be cleaned and oiled at loading time
Quick View
,
NAKAMURA CNC Turning Centre TW10MM twin spindle, twin turret, C axis, bar loader (1998)

NAKAMURA CNC Turning Centre TW10MM twin spindle, twin turret, C axis, bar loader (1998)

 

MACHINE REF : 13028

Machines For Sale — Lathe, CNC Fixed Head

MAKE : NAKAMURA CNC Turning Centre

MODEL : TW10MM twin spindle, twin turret, C axis, bar loader

YEAR OF MANUFACTURE : 1998

CONTROLLER : FANUC 16TT

SPECIFICATION : NAKAMURA TOME TW-10MM WITH FANUC 16TT Make: Nakamura Model Number: TW-10MM Controller: Fanuc Series 16TT Control SPECIFICATIONS Max Swing Over Bed 8.27 IN Max Turning Diameter 8.26 IN Max Turning Length 6.10 IN Distance B/w Spindle Nose and Turret 3.74 – 11.61 IN Bar Capacity Spindle 1 : 1.65 IN Bar Capacity Spindle 2 : 1.65 IN Spindle Speeds 55 - 5500 RPM Travels ( X Axis) both 7.28 IN Travels ( Z Axis) left / right 7.87 IN / 24.41 IN Turret Type (2) 12 Position Turrets Approx Weight 11,300 Lbs EQUIPPED WITH IEMCA MAGAZINE BAR FEEDER MODEL BOSS 542/37 Twin Turret / Twin Spindle Design Live Milling Capability - All 12 Position both turrets Full C Axis Spindle Rotation (2) Collet Chucks Automatic Parts Catcher RS 232 Port Interface Coolant System Sub Spindle

DESCRIPTION : This machine is in good working order . Sold without live tooling.
Quick View
,
SEDIN Ram Type Vertical Borer, in working condition 1525, capacity DxH 2500×1600 mm (1984)

SEDIN Ram Type Vertical Borer, in working condition 1525, capacity DxH 2500x1600 mm (1984)

 

MACHINE REF : 13050

Machines For Sale — Borer, Vertical/VTL Ram Type

MAKE : SEDIN Ram Type Vertical Borer, in working condition

MODEL : 1525, capacity DxH 2500x1600 mm

YEAR OF MANUFACTURE : 1984

CONTROLLER : conventional
Quick View
,
SEDIN Ram Type Vertical Borer, in working condition, EXLOADED – VIDEO AVAILABLE 1525, capacity DxH 2500×1600 mm

SEDIN Ram Type Vertical Borer, in working condition, EXLOADED - VIDEO AVAILABLE 1525, capacity DxH 2500x1600 mm

 

MACHINE REF : 13073

Machines For Sale — Borer, Vertical/VTL Ram Type

MAKE : SEDIN Ram Type Vertical Borer, in working condition, EXLOADED - VIDEO AVAILABLE

MODEL : 1525, capacity DxH 2500x1600 mm

CONTROLLER : conventional
Quick View
,
AKYAPAK 4-rolls Plate Bending Rolls (2010) AKBEND AHS 20/60, capacity 70×2100 mm (2010)

AKYAPAK 4-rolls Plate Bending Rolls (2010) AKBEND AHS 20/60, capacity 70x2100 mm (2010)

 

MACHINE REF : 13016

Machines For Sale — Sheet Metal & Plate, Bending Rolls

MAKE : AKYAPAK 4-rolls Plate Bending Rolls (2010)

MODEL : AKBEND AHS 20/60, capacity 70x2100 mm

YEAR OF MANUFACTURE : 2010
Quick View
,
DEFUM Turret Type Vertical Borer, visible under power, EXLOADED KNA-110/135 S, capacity DxH 1350×950 mm

DEFUM Turret Type Vertical Borer, visible under power, EXLOADED KNA-110/135 S, capacity DxH 1350x950 mm

 

MACHINE REF : 13072

Machines For Sale — Borer, Vertical/VTL Turret

MAKE : DEFUM Turret Type Vertical Borer, visible under power, EXLOADED

MODEL : KNA-110/135 S, capacity DxH 1350x950 mm

CONTROLLER : conventional

SPECIFICATION : Faceplate diameter 1100 mm, Max workpiece diameter 1350 mm, Max workpiece height 950 mm, Max workpipece weight 4000 kg, Main motor power 30 kW, Overall dimensions 2750x2350x3100 mm, Weight 11000 kg,
Quick View
,
PIESOK Guillotine Shear (1995) CNTA 3150/10A
PIESOK Guillotine Shear (1995) CNTA 3150/10A   ENQUIRY REF : MACHINE REF : 12391365 For Sale -- Sheet Metal & Plate, Shear/Guillotine MAKE : PIESOK Guillotine Shear (1995) MODEL : CNTA 3150/10A, capacity 10x3150 mm, weight 11500 kg MAKE : PIESOK Guillotine Shear (1995) MODEL : CNTA 3150/10A, capacity 10x3150 mm, weight 11500 kg Controller : conventional Year Of Manufacture 1995 PRICE : 16500 EUR (Prices are quoted for machines ex works, not loaded to transport, unless otherwise agreed.) Machines are offered subject to prior sale and payment terms are 100% cleared funds against invoice and before removal unless otherwise agreed. We reserve the right to change price and amend specifications without prior notice and cannot be held responsible for any errors contained in the data herein. It is recommended that specifications and other factual data are checked before purchase.
Quick View
,
MONZESI ROSSI MONZA 400

MONZESI ROSSI MONZA 400

 

MACHINE REF : 13024

Machines For Sale — Grinder, Centreless

MAKE : MONZESI ROSSI MONZA

MODEL : 400

SPECIFICATION : MACHINE UNDER POWER GOOD WORKING CONDITION,HYDRAULIC PLANT NEW

DESCRIPTION : min workpieces diam 3 mm max workpieces diam 100 mm working grinding wheels dimension: 406 x 204 x 152 mm driving grinding wheels dimension: 254 x 204 x 115 mm
Quick View
,
RYAZAN Heavy Duty Centre Lathe RT2503, capacity DxL 630×1000 mm

RYAZAN Heavy Duty Centre Lathe RT2503, capacity DxL 630x1000 mm

 

MACHINE REF : 13041

Machines For Sale — Lathe, Conventional >=2m b/c

MAKE : RYAZAN Heavy Duty Centre Lathe

MODEL : RT2503, capacity DxL 630x1000 mm

CONTROLLER : conventional
Quick View
,
HAAS Vertical Machining Centre WF4 – twin pallet (2005) (2005)

HAAS Vertical Machining Centre WF4 - twin pallet (2005) (2005)

 

MACHINE REF : 13076

Machines For Sale — Machining Centre, Vertical

MAKE : HAAS Vertical Machining Centre

MODEL : WF4 - twin pallet (2005)

YEAR OF MANUFACTURE : 2005

CONTROLLER : HAAS

DESCRIPTION : Faulty vector drive
Quick View
,
SEDIN Ram Type Vertical Borer, in working condition – VIDEO AVAILABLE 1L532, capacity DxH 3150×1600 mm (1979)

SEDIN Ram Type Vertical Borer, in working condition - VIDEO AVAILABLE 1L532, capacity DxH 3150x1600 mm (1979)

 

MACHINE REF : 13061

Machines For Sale — Borer, Vertical/VTL Ram Type

MAKE : SEDIN Ram Type Vertical Borer, in working condition - VIDEO AVAILABLE

MODEL : 1L532, capacity DxH 3150x1600 mm

YEAR OF MANUFACTURE : 1979

CONTROLLER : conventional
Quick View
,
AKYAPAK 4-rolls Plate Bending Rolls (2010) AHS 20/20, capacity 25×2100 mm (2010)

AKYAPAK 4-rolls Plate Bending Rolls (2010) AHS 20/20, capacity 25x2100 mm (2010)

 

MACHINE REF : 13019

Machines For Sale — Sheet Metal & Plate, Bending Rolls

MAKE : AKYAPAK 4-rolls Plate Bending Rolls (2010)

MODEL : AHS 20/20, capacity 25x2100 mm

YEAR OF MANUFACTURE : 2010

SPECIFICATION : Max bending thickness 25 mm, Max pre-bending thickness 20 mm, Max bending width 2100 mm, Upper roll diameter 330 mm, Lower roll diameter 300 mm, Side rolls diameter 240 mm, Weight 9 t
Quick View
,
KRAMATORSK Heavy Duty Centre Lathe, very good working condition – VIDEO 1A670, capacity DxL 2000×10000 mm (1983)

KRAMATORSK Heavy Duty Centre Lathe, very good working condition - VIDEO 1A670, capacity DxL 2000x10000 mm (1983)

 

MACHINE REF : 13020

Machines For Sale — Lathe, Conventional >=2m b/c

MAKE : KRAMATORSK Heavy Duty Centre Lathe, very good working condition - VIDEO

MODEL : 1A670, capacity DxL 2000x10000 mm

YEAR OF MANUFACTURE : 1983

CONTROLLER : conventional

SPECIFICATION : MANY MORE PICTURES AVAILABLE ON REQUEST.
Quick View
,
TOS HOSTIVAR Universal Cylindrical Grinder BUC 63A, capacity DxL 630×3000 mm (1983)

TOS HOSTIVAR Universal Cylindrical Grinder BUC 63A, capacity DxL 630x3000 mm (1983)

 

MACHINE REF : 13064

Machines For Sale — Grinder, Cylindrical Universal

MAKE : TOS HOSTIVAR Universal Cylindrical Grinder

MODEL : BUC 63A, capacity DxL 630x3000 mm

YEAR OF MANUFACTURE : 1983

CONTROLLER : conventional
Quick View
,
MAZAK Vertical Machining Centre SVC 2000L/120
MAZAK Vertical Machining Centre SVC 2000L/120   ENQUIRY REF : MACHINE REF : 12358365 For Sale -- Machining Centre, Vertical MAKE : MAZAK Vertical Machining Centre MODEL : SVC 2000L/120 (2005) 5.4m table MAKE : MAZAK Vertical Machining Centre MODEL : SVC 2000L/120 (2005) 5.4m table Controller : 640M Specification : MAZAK SVC 2000L/120 2005 X : 3080mm Y : 510mm Z : 510mm table : 5400mm x 508mm load 3400kg Mazatrol 640M ATC 30 outils SK40 POWER 22kW Year Of Manufacture 2005
Quick View
,
JUNKER Internal and Face Grinder, in good working condition, 2OFF, VIDEOS BD 20 CNC, specification on pictures, FANUC, accessories, manuals (2001)

JUNKER Internal and Face Grinder, in good working condition, 2OFF, VIDEOS BD 20 CNC, specification on pictures, FANUC, accessories, manuals (2001)

 

MACHINE REF : 13065

Machines For Sale — Grinder, Cylindrical Internal CNC

MAKE : JUNKER Internal and Face Grinder, in good working condition, 2OFF, VIDEOS

MODEL : BD 20 CNC, specification on pictures, FANUC, accessories, manuals

YEAR OF MANUFACTURE : 2001

CONTROLLER : FANUC 210i-T
Quick View
,
RYAZAN 4-Rolls Plate Bending Rolls, working condition, visible under power IB2424, capacity 28×2500 mm (1983)

RYAZAN 4-Rolls Plate Bending Rolls, working condition, visible under power IB2424, capacity 28x2500 mm (1983)

 

MACHINE REF : 13040

Machines For Sale — Sheet Metal & Plate, Bending Rolls

MAKE : RYAZAN 4-Rolls Plate Bending Rolls, working condition, visible under power

MODEL : IB2424, capacity 28x2500 mm

YEAR OF MANUFACTURE : 1983

CONTROLLER : conventional

SPECIFICATION : In working condition, visible under power, slightely used.
Quick View
,
KRAMATORSK Heavy Duty Centre Lathe 1A665, capacity DxL 1600×8000 mm

KRAMATORSK Heavy Duty Centre Lathe 1A665, capacity DxL 1600x8000 mm

 

MACHINE REF : 13052

Machines For Sale — Lathe, Conventional >=2m b/c

MAKE : KRAMATORSK Heavy Duty Centre Lathe

MODEL : 1A665, capacity DxL 1600x8000 mm

CONTROLLER : conventional

SPECIFICATION : Good mechanics, electrics need revision.
Quick View
,
TRUMPF Laser Cutter (2006), under power, hours 40670 / 19512 – EXLOADED TRUMATIC 4030, 4000W, XYZ 4000x2000x112 mm (2006)

TRUMPF Laser Cutter (2006), under power, hours 40670 / 19512 - EXLOADED TRUMATIC 4030, 4000W, XYZ 4000x2000x112 mm (2006)

 

MACHINE REF : 13013

Machines For Sale — Sheet Metal & Plate, Laser Cutter

MAKE : TRUMPF Laser Cutter (2006), under power, hours 40670 / 19512 - EXLOADED

MODEL : TRUMATIC 4030, 4000W, XYZ 4000x2000x112 mm

YEAR OF MANUFACTURE : 2006

CONTROLLER : SIEMENS SINUMERIK 840 D

SPECIFICATION : Laser Power : 4000W Working Area: 4000 x 2000 x 112 mm Work area : in X direction 4000 mm in Y direction 2000 mm in Z direction 112 mm Max. Sheet Thickness: 20 mm Accuracy: 0,01 mm SPEED Max. positioning speed axially parallel 60 m/min simultaneous 85 m/min Dimensions : Lenght 11600 mm Width 5200 mm Height 2000 mm Total weight approx. 16000 kg

DESCRIPTION : Laser ON :40670, Beam ON:19512; This laser is in good technical condition and under power.
Quick View
,
AKYAPAK 4-rolls Plate Bending Rolls AHS 30/40, capacity 50×3150 mm

AKYAPAK 4-rolls Plate Bending Rolls AHS 30/40, capacity 50x3150 mm

 

MACHINE REF : 13017

Machines For Sale — Sheet Metal & Plate, Bending Rolls

MAKE : AKYAPAK 4-rolls Plate Bending Rolls

MODEL : AHS 30/40, capacity 50x3150 mm
Quick View
,
You Ji Horizontal Machining Centre HMC 800BP (2012) Twin 800mm pallets, full B axis, Fanuc Oi MD (2012)

You Ji Horizontal Machining Centre HMC 800BP (2012) Twin 800mm pallets, full B axis, Fanuc Oi MD (2012)

 

MACHINE REF : 13044

Machines For Sale — Machining Centre, Horizontal

MAKE : You Ji Horizontal Machining Centre

MODEL : HMC 800BP (2012) Twin 800mm pallets, full B axis, Fanuc Oi MD

YEAR OF MANUFACTURE : 2012

CONTROLLER : Fanuc Oi MD

SPECIFICATION : Youji hmc yr 2012 with 2 pallet Table size 800 x 800 , speed 10,000 spindle bt-50, atc -40, table index 0.001 degrees spindle thru coolant

DESCRIPTION : Very good working order FOB Port price
Quick View
,
KOLOMNA Ram Type Vertical Borer, very good condition, visible under power 1580L, capacity DxL 8000×3200 mm, weight 248 t, accessories (1970)

KOLOMNA Ram Type Vertical Borer, very good condition, visible under power 1580L, capacity DxL 8000x3200 mm, weight 248 t, accessories (1970)

 

MACHINE REF : 13047

Machines For Sale — Borer, Vertical/VTL Ram Type

MAKE : KOLOMNA Ram Type Vertical Borer, very good condition, visible under power

MODEL : 1580L, capacity DxL 8000x3200 mm, weight 248 t, accessories

YEAR OF MANUFACTURE : 1970

CONTROLLER : conventional
Quick View
,
CITIZEN CNC sliding head lathe L32 VII (2004)
CITIZEN CNC sliding head lathe L32 VII (2004)   ENQUIRY REF : MACHINE REF : 12363365 For Sale -- Lathe, CNC Sliding Head MAKE : CITIZEN CNC sliding head lathe MODEL : L32 VII (2004) with long parts adaptor and subspindle MAKE : CITIZEN CNC sliding head lathe MODEL : L32 VII (2004) with long parts adaptor and subspindle Controller : CINCOM Description : The machine has been serviced every year by Citizen on their CMSure service. ** NOTE: This machine will not be available for delivery until April 2017. The machine can be secured with a deposit and the balance paid before delivery. Specification : Serial No.: V13119 Year: 2004 Main Spindle: 5 turning tool positions, 4 side power driven tools, 4 static end working tools, Sub Spindle: 3 Static end working tools, The machine also comes with a single front/back end working power tool. Long parts gantry arm fitted (hence the three positions on the sub spindle), Coolblaster High Pressure Coolant. The coolblaster has 4 high pressure lines, one through the subspindle, the others through the tooling on the platen and subspindle tools, Absolent Fume extractor, Swarf conveyor, IEMCA BOSS 332/E/R magazine bar feed, Year Of Manufacture 2004
Quick View
,
MAS Jig Borer – CIF PRICE WKV 100, table 1000×1600 mm, weight 16 t, tooling, attachments

MAS Jig Borer - CIF PRICE WKV 100, table 1000x1600 mm, weight 16 t, tooling, attachments

 

MACHINE REF : 13049

Machines For Sale — Borer, Jig

MAKE : MAS Jig Borer - CIF PRICE

MODEL : WKV 100, table 1000x1600 mm, weight 16 t, tooling, attachments

CONTROLLER : conventional
Quick View
,
Lot of 3 off sheet metal machines Press brakes and guillotine

Lot of 3 off sheet metal machines Press brakes and guillotine

 

MACHINE REF : 13005

Machines For Sale — Lots/Batches of Machines

MAKE : Lot of 3 off sheet metal machines

MODEL : Press brakes and guillotine

SPECIFICATION : Press brake : COMESSA Model : PN 160 4000 x 160 T Press brake : SAGITA Model : 120x3000 3000 x 120 T Guillotine : COMESSA Model : CN 310 3000 x 10

DESCRIPTION : Loaded to truck
Quick View
,
NILES-MAGDEBURG Heavy Duty Lathe DP 3/3×20000, capacity DxL 2500×20000 mm, 3 off steadies (1979)

NILES-MAGDEBURG Heavy Duty Lathe DP 3/3x20000, capacity DxL 2500x20000 mm, 3 off steadies (1979)

 

MACHINE REF : 13015

Machines For Sale — Lathe, Conventional >=2m b/c

MAKE : NILES-MAGDEBURG Heavy Duty Lathe

MODEL : DP 3/3x20000, capacity DxL 2500x20000 mm, 3 off steadies

YEAR OF MANUFACTURE : 1979

CONTROLLER : conventional

SPECIFICATION : Swing over bed 2500 mm, Swing over cross slide 2000 mm, Swing in gap 3500 mm, Distance b/n centres 20000 mm, Max workpiece weight 30000 kg, Faceplate diameter 2500 mm Spindle diameter 100 mm, Spindle speeds range 0,45-140 rpm, Total power requirement 60 kW, Weight, ca. 64000 kg, 3 off steadies
Quick View
,
TITAN Ram/Turret Type Vertical Borer, missings in electrics SC17, capacity DxH 1650×1200 mm

TITAN Ram/Turret Type Vertical Borer, missings in electrics SC17, capacity DxH 1650x1200 mm

 

MACHINE REF : 13068

Machines For Sale — Borer, Vertical/VTL Turret

MAKE : TITAN Ram/Turret Type Vertical Borer, missings in electrics

MODEL : SC17, capacity DxH 1650x1200 mm

CONTROLLER : conventional
Quick View
,
DAEWOO Twin Pallet HMC DMH500 (1998) – fanuc 16m control (1998)

DAEWOO Twin Pallet HMC DMH500 (1998) - fanuc 16m control (1998)

 

MACHINE REF : 13030

Machines For Sale — Machining Centre, Horizontal

MAKE : DAEWOO Twin Pallet HMC

MODEL : DMH500 (1998) - fanuc 16m control

YEAR OF MANUFACTURE : 1998

DESCRIPTION : loaded to container price
Quick View
,
CITIZEN Sliding Head Lathe M32 iii (2006) with live tools and bar loader, FOB price (2007)

CITIZEN Sliding Head Lathe M32 iii (2006) with live tools and bar loader, FOB price (2007)

 

MACHINE REF : 13027

Machines For Sale — Lathe, CNC Sliding Head

MAKE : CITIZEN Sliding Head Lathe

MODEL : M32 iii (2006) with live tools and bar loader, FOB price

YEAR OF MANUFACTURE : 2007

SPECIFICATION : Citizen M32 III new 2006 , with Iemca Barfeed BOSS 332 Bar Feed Swarf conveyor Swarf bin High-pressure coolant unit 1x 3 position endworking tool holder for the turret 1x 2 position external turning tool holder for the turret Assortment of spares and accessories Documentation

DESCRIPTION : FOB PORT
Quick View
,
HARTFORD Vertical Machining Centre VMC1020S Fanuc OMD (1999)
HARTFORD Vertical Machining Centre VMC1020S Fanuc OMD   ENQUIRY REF : MACHINE REF : 12379365 For Sale -- Machining Centre, Vertical MAKE : HARTFORD Vertical Machining Centre MODEL : VMC1020S Fanuc OMD (1999) MAKE : HARTFORD Vertical Machining Centre MODEL : VMC1020S Fanuc OMD (1999) Controller : FANUC OMD Specification : HARTFORD VMC1020 S X 1020 Y510 Z510mm Table 1200X600mm FACNUC Alarm 910 RAM PARITY, parameter problem No tooling Year Of Manufacture 1999
Quick View
,
SEDIN Ram Type Vertical Borer 1510, capacity DxH 1000×800 mm

SEDIN Ram Type Vertical Borer 1510, capacity DxH 1000x800 mm

 

MACHINE REF : 13071

Machines For Sale — Borer, Vertical/VTL Turret

MAKE : SEDIN Ram Type Vertical Borer

MODEL : 1510, capacity DxH 1000x800 mm

CONTROLLER : conventional
Quick View
,
CHIRON Machining Centre FZ12W with Fanuc 21m

CHIRON Machining Centre FZ12W with Fanuc 21m

 

MACHINE REF : 13046

Machines For Sale — Machining Centre, Vertical

MAKE : CHIRON Machining Centre

MODEL : FZ12W with Fanuc 21m

CONTROLLER : Fanuc 21m

DESCRIPTION : seller seeking offers

Placeholder
Quick View
,
SEDIN Ram Type Vertical Borers – 2off in lot, price for lot ExW 1508, DxH 800×800 mm, 9,5 t AND 1510, DxH 1000×800 mm, 10,5 t

SEDIN Ram Type Vertical Borers - 2off in lot, price for lot ExW 1508, DxH 800x800 mm, 9,5 t AND 1510, DxH 1000x800 mm, 10,5 t

 

MACHINE REF : 13063

Machines For Sale — Borer, Vertical/VTL Turret

MAKE : SEDIN Ram Type Vertical Borers - 2off in lot, price for lot ExW

MODEL : 1508, DxH 800x800 mm, 9,5 t AND 1510, DxH 1000x800 mm, 10,5 t

CONTROLLER : conventional
Quick View
,
Koenig and Bauer CENTRELESS GRINDER Koebau Multimat 250 – 150mm part diameter max

Koenig and Bauer CENTRELESS GRINDER Koebau Multimat 250 - 150mm part diameter max

 

MACHINE REF : 13029

Machines For Sale — Grinder, Centreless

MAKE : Koenig and Bauer CENTRELESS GRINDER

MODEL : Koebau Multimat 250 - 150mm part diameter max

DESCRIPTION : video on request price FOB port
Quick View
,
HYUNDAI KIA Drill tap VX380T (2010) (2010)

HYUNDAI KIA Drill tap VX380T (2010) (2010)

 

MACHINE REF : 13032

Machines For Sale — Drill/Tap, CNC

MAKE : HYUNDAI KIA Drill tap

MODEL : VX380T (2010)

YEAR OF MANUFACTURE : 2010

CONTROLLER : Mitsubishi M70

SPECIFICATION : Specs available on request in PDF
Quick View
,
6 off MISSLER SAWS DEB 410
6 off MISSLER SAWS DEB 410   ENQUIRY REF : MACHINE REF : 12369365 For Sale -- Saw, Band Horizontal MAKE : 6 off MISSLER SAWS MODEL : DEB 410 (conventional and CNC, 1999-2004) MAKE : 6 off MISSLER SAWS MODEL : DEB 410 (conventional and CNC, 1999-2004) Specification : Missler DEB 410 twin motors Standard Year 1999 Missler DEB 410 twin motors Compucut Year 2000 Missler DEB 410 twin motors CNC Year 2004 3x Missler DEB 410 twin motors CNC Year 2003
Quick View
,
HAUSER Jig Borer, very nice working condition OP 3, table 320×550 mm, XYZ 400x250x400 mm, accessories (1977)

HAUSER Jig Borer, very nice working condition OP 3, table 320x550 mm, XYZ 400x250x400 mm, accessories (1977)

 

MACHINE REF : 13054

Machines For Sale — Borer, Jig

MAKE : HAUSER Jig Borer, very nice working condition

MODEL : OP 3, table 320x550 mm, XYZ 400x250x400 mm, accessories

YEAR OF MANUFACTURE : 1977

CONTROLLER : conventional
Quick View
,
VDF Boehringer Deep Hole Borer 6000m capacity

VDF Boehringer Deep Hole Borer 6000m capacity

 

MACHINE REF : 13037

Machines For Sale — Borer, Deep Hole

MAKE : VDF Boehringer Deep Hole Borer

MODEL : 6000m capacity

SPECIFICATION : VDF Bohringer Deep Hole Borer x 6000mm Year 1975 Swing over bed 620mm Max dia held in roller steadies 275mm Max boring length 6,000mm Headstock 75 kw drive Headstock speeds 35.5 – 1800 rpm Counter rotation Boring bar drive 50kw Counter rotation speeds variable up to 1800 rpm Boring feeds 0 – 200mm/Min. Rapids 3,000mm/Min

DESCRIPTION : complete with 3 point roller steady Oil tank pumps and filters Rear swarf collection baskets and trays with scavenge pump Some bring bars and associated tooling included Loaded to truck

About Swissware.tools
Swissware.tools Machinery Marketplace.
Chaltenbodenstrasse 6D
8834 Schindellegi
Schwytz
Phone: 0041 79 953 47 29
Email: grant@swissware.tools
www.swissware.tools

Copyright by swissware.tools 2012-2017

close