PROTH Surface Grinder (2003) – FCA PRICE PSGS 4080 AH, capacity 900×460 mm, magnetic table 800×400 mm (2003)

SEDIN Ram Type Vertical Borer 1510, capacity DxH 1000×800 mm

SEDIN Ram Type Vertical Borer 1510, capacity DxH 1000x800 mm

MACHINE REF : 13071

Machines For Sale — Borer, Vertical/VTL Turret

MAKE : SEDIN Ram Type Vertical Borer

MODEL : 1510, capacity DxH 1000x800 mm

CONTROLLER : conventional

Lathe-CNC-Sliding-Head, Machines For Sale

CITIZEN CNC sliding head lathe L32 VII (2004)

CITIZEN CNC sliding head lathe L32 VII (2004) ENQUIRY REF : MACHINE REF : 12363365 For Sale -- Lathe, CNC Sliding Head MAKE : CITIZEN CNC sliding head lathe MODEL : L32 VII (2004) with long parts adaptor and subspindle MAKE : CITIZEN CNC sliding head lathe MODEL : L32 VII (2004) with long parts adaptor and subspindle Controller : CINCOM Description : The machine has been serviced every year by Citizen on their CMSure service. ** NOTE: This machine will not be available for delivery until April 2017. The machine can be secured with a deposit and the balance paid before delivery. Specification : Serial No.: V13119 Year: 2004 Main Spindle: 5 turning tool positions, 4 side power driven tools, 4 static end working tools, Sub Spindle: 3 Static end working tools, The machine also comes with a single front/back end working power tool. Long parts gantry arm fitted (hence the three positions on the sub spindle), Coolblaster High Pressure Coolant. The coolblaster has 4 high pressure lines, one through the subspindle, the others through the tooling on the platen and subspindle tools, Absolent Fume extractor, Swarf conveyor, IEMCA BOSS 332/E/R magazine bar feed, Year Of Manufacture 2004

Gear, Hobber, Machines For Sale

TOS Gear Hobber FO10 (1980) 1m x modul 10, with change gears (1980)

TOS Gear Hobber FO10 (1980) 1m x modul 10, with change gears (1980)

MACHINE REF : 13034

Machines For Sale — Gear, Hobber

MAKE : TOS Gear Hobber

MODEL : FO10 (1980) 1m x modul 10, with change gears

YEAR OF MANUFACTURE : 1980

Borer, Vertical/VTL Turret CNC, Machines For Sale

TOS HULIN CNC Turret Type Vertical Borer (1998), visible under power SKI 12 CNC, capacity DxH 1600×1200 mm (1998)

TOS HULIN CNC Turret Type Vertical Borer (1998), visible under power SKI 12 CNC, capacity DxH 1600x1200 mm (1998)

MACHINE REF : 13014

Machines For Sale — Borer, Vertical/VTL Turret CNC

MAKE : TOS HULIN CNC Turret Type Vertical Borer (1998), visible under power

MODEL : SKI 12 CNC, capacity DxH 1600x1200 mm

YEAR OF MANUFACTURE : 1998

CONTROLLER : SIEMENS SINUMERIK

SPECIFICATION : Faceplate diameter .......................................... 1200 mm, swing diameter................................................. 1600 mm, turning height .................................................. 1200 mm, max. ram stroke ............................................... 1100 mm, Tools ................................................................. 4

DESCRIPTION : The machine is in very good technical condition and under power.

Drill/Tap, CNC, Machines For Sale

HYUNDAI KIA Drill tap VX380T (2010) (2010)

HYUNDAI KIA Drill tap VX380T (2010) (2010)

MACHINE REF : 13032

Machines For Sale — Drill/Tap, CNC

MAKE : HYUNDAI KIA Drill tap

MODEL : VX380T (2010)

YEAR OF MANUFACTURE : 2010

CONTROLLER : Mitsubishi M70

SPECIFICATION : Specs available on request in PDF

Borer, Vertical/VTL Ram Type, Machines For Sale

SEDIN Ram Type Vertical Borer, in working condition – VIDEO AVAILABLE 1L532, capacity DxH 3150×1600 mm (1979)

SEDIN Ram Type Vertical Borer, in working condition - VIDEO AVAILABLE 1L532, capacity DxH 3150x1600 mm (1979)

MACHINE REF : 13061

Machines For Sale — Borer, Vertical/VTL Ram Type

MAKE : SEDIN Ram Type Vertical Borer, in working condition - VIDEO AVAILABLE

MODEL : 1L532, capacity DxH 3150x1600 mm

YEAR OF MANUFACTURE : 1979

CONTROLLER : conventional

Grinder - Cylindrical Universal, Machines For Sale

TOS HOSTIVAR Universal Cylindrical Grinder BUC 63A, capacity DxL 630×3000 mm (1983)

TOS HOSTIVAR Universal Cylindrical Grinder BUC 63A, capacity DxL 630x3000 mm (1983)

MACHINE REF : 13064

Machines For Sale — Grinder, Cylindrical Universal

MAKE : TOS HOSTIVAR Universal Cylindrical Grinder

MODEL : BUC 63A, capacity DxL 630x3000 mm

YEAR OF MANUFACTURE : 1983

CONTROLLER : conventional

DEFUM Turret Type Vertical Borer, visible under power, EXLOADED KNA-110/135 S, capacity DxH 1350×950 mm

DEFUM Turret Type Vertical Borer, visible under power, EXLOADED KNA-110/135 S, capacity DxH 1350x950 mm

MACHINE REF : 13072

Machines For Sale — Borer, Vertical/VTL Turret

MAKE : DEFUM Turret Type Vertical Borer, visible under power, EXLOADED

MODEL : KNA-110/135 S, capacity DxH 1350x950 mm

CONTROLLER : conventional

SPECIFICATION : Faceplate diameter 1100 mm, Max workpiece diameter 1350 mm, Max workpiece height 950 mm, Max workpipece weight 4000 kg, Main motor power 30 kW, Overall dimensions 2750x2350x3100 mm, Weight 11000 kg,

Grinder-Surface Table, Machines For Sale

SNOW Surface Grinder OS 96

SNOW Surface Grinder OS 96 ENQUIRY REF : MACHINE REF : 12361365 For Sale -- Grinder, Surface Recip Table MAKE : SNOW Surface Grinder MODEL : OS 96 - 2.9m x 460mm x 700mm (vert) , twin 500mm x 1200mm tables MAKE : SNOW Surface Grinder MODEL : OS 96 - 2.9m x 460mm x 700mm (vert) , twin 500mm x 1200mm tables Specification : PRICE INCLUDES LOADING TO TRUCK With lot of grinding wheels

Grinder, Centreless, Machines For Sale

MONZESI ROSSI MONZA 400

MONZESI ROSSI MONZA 400

MACHINE REF : 13024

Machines For Sale — Grinder, Centreless

MAKE : MONZESI ROSSI MONZA

MODEL : 400

SPECIFICATION : MACHINE UNDER POWER GOOD WORKING CONDITION,HYDRAULIC PLANT NEW

DESCRIPTION : min workpieces diam 3 mm max workpieces diam 100 mm working grinding wheels dimension: 406 x 204 x 152 mm driving grinding wheels dimension: 254 x 204 x 115 mm

Grinder, Crankshaft, Machines For Sale

2 off TOS Crankshaft Grinders BEK 80 and FEK 80

2 off TOS Crankshaft Grinders BEK 80 and FEK 80

MACHINE REF : 13056

Machines For Sale — Grinder, Crankshaft

MAKE : 2 off TOS Crankshaft Grinders

MODEL : BEK 80 and FEK 80

DESCRIPTION : Price for pair, seller will split

Borer, Deep Hole, Machines For Sale

VDF Boehringer Deep Hole Borer 6000m capacity

VDF Boehringer Deep Hole Borer 6000m capacity

MACHINE REF : 13037

Machines For Sale — Borer, Deep Hole

MAKE : VDF Boehringer Deep Hole Borer

MODEL : 6000m capacity

SPECIFICATION : VDF Bohringer Deep Hole Borer x 6000mm Year 1975 Swing over bed 620mm Max dia held in roller steadies 275mm Max boring length 6,000mm Headstock 75 kw drive Headstock speeds 35.5 1800 rpm Counter rotation Boring bar drive 50kw Counter rotation speeds variable up to 1800 rpm Boring feeds 0 200mm/Min. Rapids 3,000mm/Min

DESCRIPTION : complete with 3 point roller steady Oil tank pumps and filters Rear swarf collection baskets and trays with scavenge pump Some bring bars and associated tooling included Loaded to truck

Machines For Sale, Sheet Metal & Plate, Bending Rolls

PARMIGIANI CNC 4-rolls Plate Bending Rolls VBH-3100/40, capacity 40×3100 mm

PARMIGIANI CNC 4-rolls Plate Bending Rolls VBH-3100/40, capacity 40x3100 mm

MACHINE REF : 13018

Machines For Sale — Sheet Metal & Plate, Bending Rolls

MAKE : PARMIGIANI CNC 4-rolls Plate Bending Rolls

MODEL : VBH-3100/40, capacity 40x3100 mm

CONTROLLER : CNC

Machines For Sale, Machining Centre, 5 Axis Universal

DECKEL MAHO 5-axis Twin Pallet Universal Machining Centre, 9500 hrs only DMC 60T, thru spindle coolant, chip conveyor, tooling, under power (2007)

DECKEL MAHO 5-axis Twin Pallet Universal Machining Centre, 9500 hrs only DMC 60T, thru spindle coolant, chip conveyor, tooling, under power (2007)

MACHINE REF : 13023

Machines For Sale — Machining Centre, 5 Axis Universal

MAKE : DECKEL MAHO 5-axis Twin Pallet Universal Machining Centre, 9500 hrs only

MODEL : DMC 60T, thru spindle coolant, chip conveyor, tooling, under power

YEAR OF MANUFACTURE : 2007

CONTROLLER : HEIDENHAIN

SPECIFICATION : 30 X-Axis Travel 22 Y-Axis Travel 22 Z-Axis Travel B-Axis Plus 30 Degrees C-Axis Full 360 Degrees 20 to 12,000 RPM CAT 40 Spindle Coolant Thru Spindle Dual Pallets 60 ATC Heidenhain CNC Controls Full Simultaneous Head Swiveling Tooling & Chip Conveyor Weight: 21,000 Lbs. Floor Space: 160 X 250 X 98 HT

DESCRIPTION : Under Power In Plant. Good Condition, 9500 Cutting Hours

PINNACLE VMC 1100S 700x1300mm (2005) (2005)

PINNACLE VMC 1100S 700x1300mm (2005) (2005)

MACHINE REF : 13025

Machines For Sale — Machining Centre, Vertical

MAKE : PINNACLE VMC

MODEL : 1100S 700x1300mm (2005)

YEAR OF MANUFACTURE : 2005

CONTROLLER : mitsubishi M65

SPECIFICATION : no ce marking

Gear-Generator, Machines For Sale

OERLIKON Bevel Gear Generator S17 (1980)

OERLIKON Bevel Gear Generator S17 (1980) ENQUIRY REF : MACHINE REF : 12370365 For Sale -- Gear, Generator MAKE : OERLIKON Bevel Gear Generator MODEL : S17 (1980) - Seller seeking offer MAKE : OERLIKON Bevel Gear Generator MODEL : S17 (1980) - Seller seeking offer Year Of Manufacture 1980

Machines For Sale, Press - Knuck Joint

BARNAUL Knuckle Joint Press, GO 2000, excellent condition KB8336B, capacity 400 t, table 500×630 mm

BARNAUL Knuckle Joint Press, GO 2000, excellent condition KB8336B, capacity 400 t, table 500x630 mm

MACHINE REF : 13051

Machines For Sale — Press, Knuck Joint

MAKE : BARNAUL Knuckle Joint Press, GO 2000, excellent condition

MODEL : KB8336B, capacity 400 t, table 500x630 mm

SPECIFICATION : MANY MORE PICTURES AVAILABLE ON REQUEST.

RYAZAN Heavy Duty Centre Lathe RT2503, capacity DxL 630×1000 mm

RYAZAN Heavy Duty Centre Lathe RT2503, capacity DxL 630x1000 mm

MACHINE REF : 13041

Machines For Sale — Lathe, Conventional >=2m b/c

MAKE : RYAZAN Heavy Duty Centre Lathe

MODEL : RT2503, capacity DxL 630x1000 mm

CONTROLLER : conventional

Machines For Sale, Machining Centre, Horizontal

You Ji Horizontal Machining Centre HMC 800BP (2012) Twin 800mm pallets, full B axis, Fanuc Oi MD (2012)

You Ji Horizontal Machining Centre HMC 800BP (2012) Twin 800mm pallets, full B axis, Fanuc Oi MD (2012)

MACHINE REF : 13044

Machines For Sale — Machining Centre, Horizontal

MAKE : You Ji Horizontal Machining Centre

MODEL : HMC 800BP (2012) Twin 800mm pallets, full B axis, Fanuc Oi MD

YEAR OF MANUFACTURE : 2012

CONTROLLER : Fanuc Oi MD

SPECIFICATION : Youji hmc yr 2012 with 2 pallet Table size 800 x 800 , speed 10,000 spindle bt-50, atc -40, table index 0.001 degrees spindle thru coolant

DESCRIPTION : Very good working order FOB Port price

Lathe-CNC-Sliding-Head, Machines For Sale

TORNOS CNC sliding head lathe GAMMA 20/6 – 2010 (8 axis) with bar loader and tooling – Fanuc (2010)

TORNOS CNC sliding head lathe GAMMA 20/6 - 2010 (8 axis) with bar loader and tooling - Fanuc (2010)

MACHINE REF : 13031

Machines For Sale — Lathe, CNC Sliding Head

MAKE : TORNOS CNC sliding head lathe

MODEL : GAMMA 20/6 - 2010 (8 axis) with bar loader and tooling - Fanuc

YEAR OF MANUFACTURE : 2010

CONTROLLER : FANUC 31i - A

SPECIFICATION : 3-20mm bar cap 10000rpm Subpindle and main spindle with C axes Bar loader 20000 Hours approx "powered on" time, approx 4500 hrs cutting time

DESCRIPTION : Excellent condition, under power in factory

SEDIN Ram Type Vertical Borers – 2off in lot, price for lot ExW 1508, DxH 800×800 mm, 9,5 t AND 1510, DxH 1000×800 mm, 10,5 t

SEDIN Ram Type Vertical Borers - 2off in lot, price for lot ExW 1508, DxH 800x800 mm, 9,5 t AND 1510, DxH 1000x800 mm, 10,5 t

MACHINE REF : 13063

Machines For Sale — Borer, Vertical/VTL Turret

MAKE : SEDIN Ram Type Vertical Borers - 2off in lot, price for lot ExW

MODEL : 1508, DxH 800x800 mm, 9,5 t AND 1510, DxH 1000x800 mm, 10,5 t

CONTROLLER : conventional

Accessories, Floor Plates, Machines For Sale

Floor Plates 3m x 2m x 300mm , price per plate

Floor Plates 3m x 2m x 300mm , price per plate

MACHINE REF : 13002

Machines For Sale — Accessories, Floor Plates

MAKE : Floor Plates

MODEL : 3m x 2m x 300mm , price per plate

SPECIFICATION : Make: T CANAL FLOOR PLATES Delivery Time:immediately Freight Basis:ex Work bolster plate floor-plate length 3000 mm floor-plate width 2000 mm floor-plate height 300 mm Aprox weight 5 T./1 piece 5 off available total Plates in very good condition , will be cleaned and oiled at loading time

Machines For Sale, Sheet Metal & Plate, Bending Rolls

AKYAPAK 4-rolls Plate Bending Rolls (2010) AHS 20/20, capacity 25×2100 mm (2010)

AKYAPAK 4-rolls Plate Bending Rolls (2010) AHS 20/20, capacity 25x2100 mm (2010)

MACHINE REF : 13019

Machines For Sale — Sheet Metal & Plate, Bending Rolls

MAKE : AKYAPAK 4-rolls Plate Bending Rolls (2010)

MODEL : AHS 20/20, capacity 25x2100 mm

YEAR OF MANUFACTURE : 2010

SPECIFICATION : Max bending thickness 25 mm, Max pre-bending thickness 20 mm, Max bending width 2100 mm, Upper roll diameter 330 mm, Lower roll diameter 300 mm, Side rolls diameter 240 mm, Weight 9 t

SEDIN Ram Type Vertical Borer, in working condition, FCA – VIDEO AVAILABLE 1516F1, capacity DxH1600x1000 mm, weight 19,2 t, DRO (1980)

SEDIN Ram Type Vertical Borer, in working condition, FCA - VIDEO AVAILABLE 1516F1, capacity DxH1600x1000 mm, weight 19,2 t, DRO (1980)

MACHINE REF : 13062

Machines For Sale — Borer, Vertical/VTL Turret

MAKE : SEDIN Ram Type Vertical Borer, in working condition, FCA - VIDEO AVAILABLE

MODEL : 1516F1, capacity DxH1600x1000 mm, weight 19,2 t, DRO

YEAR OF MANUFACTURE : 1980

CONTROLLER : DRO

Machines For Sale, Sheet Metal & Plate - Laser Cutter

TRUMPF Laser Cutter (2006), under power, hours 40670 / 19512 – EXLOADED TRUMATIC 4030, 4000W, XYZ 4000x2000x112 mm (2006)

TRUMPF Laser Cutter (2006), under power, hours 40670 / 19512 - EXLOADED TRUMATIC 4030, 4000W, XYZ 4000x2000x112 mm (2006)

MACHINE REF : 13013

Machines For Sale — Sheet Metal & Plate, Laser Cutter

MAKE : TRUMPF Laser Cutter (2006), under power, hours 40670 / 19512 - EXLOADED

MODEL : TRUMATIC 4030, 4000W, XYZ 4000x2000x112 mm

YEAR OF MANUFACTURE : 2006

CONTROLLER : SIEMENS SINUMERIK 840 D

SPECIFICATION : Laser Power : 4000W Working Area: 4000 x 2000 x 112 mm Work area : in X direction 4000 mm in Y direction 2000 mm in Z direction 112 mm Max. Sheet Thickness: 20 mm Accuracy: 0,01 mm SPEED Max. positioning speed axially parallel 60 m/min simultaneous 85 m/min Dimensions : Lenght 11600 mm Width 5200 mm Height 2000 mm Total weight approx. 16000 kg

DESCRIPTION : Laser ON :40670, Beam ON:19512; This laser is in good technical condition and under power.

Gear, Grinder, Machines For Sale

NILES Gear Grinder – VIDEO ZSTZ 630 C2, gear dia 630 mm, module 12, weight 6,5 t, change gears

NILES Gear Grinder - VIDEO ZSTZ 630 C2, gear dia 630 mm, module 12, weight 6,5 t, change gears

MACHINE REF : 13069

Machines For Sale — Gear, Grinder

MAKE : NILES Gear Grinder - VIDEO

MODEL : ZSTZ 630 C2, gear dia 630 mm, module 12, weight 6,5 t, change gears

CONTROLLER : conventional

Machines For Sale, Machining Centre, Horizontal

DAEWOO Twin Pallet HMC DMH500 (1998) – fanuc 16m control (1998)

DAEWOO Twin Pallet HMC DMH500 (1998) - fanuc 16m control (1998)

MACHINE REF : 13030

Machines For Sale — Machining Centre, Horizontal

MAKE : DAEWOO Twin Pallet HMC

MODEL : DMH500 (1998) - fanuc 16m control

YEAR OF MANUFACTURE : 1998

DESCRIPTION : loaded to container price

KRAMATORSK Heavy Duty Centre Lathe 1A665, capacity DxL 1600×8000 mm

KRAMATORSK Heavy Duty Centre Lathe 1A665, capacity DxL 1600x8000 mm

MACHINE REF : 13052

Machines For Sale — Lathe, Conventional >=2m b/c

MAKE : KRAMATORSK Heavy Duty Centre Lathe

MODEL : 1A665, capacity DxL 1600x8000 mm

CONTROLLER : conventional

SPECIFICATION : Good mechanics, electrics need revision.

TITAN Ram/Turret Type Vertical Borer SC17, capacity DxH 1650×1200 mm (1977)

TITAN Ram/Turret Type Vertical Borer SC17, capacity DxH 1650x1200 mm (1977)

MACHINE REF : 13074

Machines For Sale — Borer, Vertical/VTL Turret

MAKE : TITAN Ram/Turret Type Vertical Borer

MODEL : SC17, capacity DxH 1650x1200 mm

YEAR OF MANUFACTURE : 1977

CONTROLLER : conventional

KRAMATORSK Heavy Duty Centre Lathe, very good working condition – VIDEO 1A670, capacity DxL 2000×10000 mm (1983)

KRAMATORSK Heavy Duty Centre Lathe, very good working condition - VIDEO 1A670, capacity DxL 2000x10000 mm (1983)

MACHINE REF : 13020

Machines For Sale — Lathe, Conventional >=2m b/c

MAKE : KRAMATORSK Heavy Duty Centre Lathe, very good working condition - VIDEO

MODEL : 1A670, capacity DxL 2000x10000 mm

YEAR OF MANUFACTURE : 1983

CONTROLLER : conventional

SPECIFICATION : MANY MORE PICTURES AVAILABLE ON REQUEST.

Grinder, Centreless, Machines For Sale

Koenig and Bauer CENTRELESS GRINDER Koebau Multimat 250 – 150mm part diameter max

Koenig and Bauer CENTRELESS GRINDER Koebau Multimat 250 - 150mm part diameter max

MACHINE REF : 13029

Machines For Sale — Grinder, Centreless

MAKE : Koenig and Bauer CENTRELESS GRINDER

MODEL : Koebau Multimat 250 - 150mm part diameter max

DESCRIPTION : video on request price FOB port

Lathe, CNC Fixed Head, Machines For Sale

MAZAK CNC Lathe QUICK TURN 200C (1998) good working order

MAZAK CNC Lathe QUICK TURN 200C (1998) good working order

MACHINE REF : 13026

Machines For Sale — Lathe, CNC Fixed Head

MAKE : MAZAK CNC Lathe

MODEL : QUICK TURN 200C (1998) good working order

DESCRIPTION : price negotiable

Borer, Vertical/VTL Ram Type, Machines For Sale

KOLOMNA Ram Type Vertical Borer, very good condition, visible under power 1580L, capacity DxL 8000×3200 mm, weight 248 t, accessories (1970)

KOLOMNA Ram Type Vertical Borer, very good condition, visible under power 1580L, capacity DxL 8000x3200 mm, weight 248 t, accessories (1970)

MACHINE REF : 13047

Machines For Sale — Borer, Vertical/VTL Ram Type

MAKE : KOLOMNA Ram Type Vertical Borer, very good condition, visible under power

MODEL : 1580L, capacity DxL 8000x3200 mm, weight 248 t, accessories

YEAR OF MANUFACTURE : 1970

CONTROLLER : conventional

Machines For Sale, Mill-Vertical CNC

CENTURION EUROPA UNIVERSAL Milling Machine CU6-CNC

CENTURION EUROPA UNIVERSAL Milling Machine CU6-CNC ENQUIRY REF : MACHINE REF : 12367365 For Sale -- Mill, Vertical CNC MAKE : CENTURION EUROPA UNIVERSAL Milling Machine MODEL : CU6-CNC 2m bed , Heidenhain Control (1998) MAKE : CENTURION EUROPA UNIVERSAL Milling Machine MODEL : CU6-CNC 2m bed , Heidenhain Control (1998) Specification : Europa, included some toolin, Speed adjuster, Adapter for different size tooling, table unmarked, very clean, Hidenhain control, Spindel " OFF" button on control panel not working, 2 metre bed, X1500, Y 700

TITAN Ram/Turret Type Vertical Borer, missings in electrics SC17, capacity DxH 1650×1200 mm

TITAN Ram/Turret Type Vertical Borer, missings in electrics SC17, capacity DxH 1650x1200 mm

MACHINE REF : 13068

Machines For Sale — Borer, Vertical/VTL Turret

MAKE : TITAN Ram/Turret Type Vertical Borer, missings in electrics

MODEL : SC17, capacity DxH 1650x1200 mm

CONTROLLER : conventional

Borer, Vertical/VTL Ram Type, Machines For Sale

SEDIN Ram Type Vertical Borer, in working condition 1525, capacity DxH 2500×1600 mm (1984)

SEDIN Ram Type Vertical Borer, in working condition 1525, capacity DxH 2500x1600 mm (1984)

MACHINE REF : 13050

Machines For Sale — Borer, Vertical/VTL Ram Type

MAKE : SEDIN Ram Type Vertical Borer, in working condition

MODEL : 1525, capacity DxH 2500x1600 mm

YEAR OF MANUFACTURE : 1984

CONTROLLER : conventional

Lathe-CNC-Sliding-Head, Machines For Sale

CITIZEN Sliding Head Lathe M32 iii (2006) with live tools and bar loader, FOB price (2007)

CITIZEN Sliding Head Lathe M32 iii (2006) with live tools and bar loader, FOB price (2007)

MACHINE REF : 13027

Machines For Sale — Lathe, CNC Sliding Head

MAKE : CITIZEN Sliding Head Lathe

MODEL : M32 iii (2006) with live tools and bar loader, FOB price

YEAR OF MANUFACTURE : 2007

SPECIFICATION : Citizen M32 III new 2006 , with Iemca Barfeed BOSS 332 Bar Feed Swarf conveyor Swarf bin High-pressure coolant unit 1x 3 position endworking tool holder for the turret 1x 2 position external turning tool holder for the turret Assortment of spares and accessories Documentation

DESCRIPTION : FOB PORT

MAZAK Vertical Machining Centre SVC 2000L/120

MAZAK Vertical Machining Centre SVC 2000L/120 ENQUIRY REF : MACHINE REF : 12358365 For Sale -- Machining Centre, Vertical MAKE : MAZAK Vertical Machining Centre MODEL : SVC 2000L/120 (2005) 5.4m table MAKE : MAZAK Vertical Machining Centre MODEL : SVC 2000L/120 (2005) 5.4m table Controller : 640M Specification : MAZAK SVC 2000L/120 2005 X : 3080mm Y : 510mm Z : 510mm table : 5400mm x 508mm load 3400kg Mazatrol 640M ATC 30 outils SK40 POWER 22kW Year Of Manufacture 2005

Lathe, CNC Fixed Head, Machines For Sale

KIA CNC Lathe KIATURN 21 – 1998 with Yasnac control and Bar loader (1998)

KIA CNC Lathe KIATURN 21 - 1998 with Yasnac control and Bar loader (1998)

MACHINE REF : 13043

Machines For Sale — Lathe, CNC Fixed Head

MAKE : KIA CNC Lathe

MODEL : KIATURN 21 - 1998 with Yasnac control and Bar loader

YEAR OF MANUFACTURE : 1998

SPECIFICATION : GOOD WORKING ORDER

Borer, Jig, Machines For Sale

MAS Jig Borer – CIF PRICE WKV 100, table 1000×1600 mm, weight 16 t, tooling, attachments

MAS Jig Borer - CIF PRICE WKV 100, table 1000x1600 mm, weight 16 t, tooling, attachments

MACHINE REF : 13049

Machines For Sale — Borer, Jig

MAKE : MAS Jig Borer - CIF PRICE

MODEL : WKV 100, table 1000x1600 mm, weight 16 t, tooling, attachments

CONTROLLER : conventional

NILES-MAGDEBURG Heavy Duty Lathe DP 3/3×20000, capacity DxL 2500×20000 mm, 3 off steadies (1979)

NILES-MAGDEBURG Heavy Duty Lathe DP 3/3x20000, capacity DxL 2500x20000 mm, 3 off steadies (1979)

MACHINE REF : 13015

Machines For Sale — Lathe, Conventional >=2m b/c

MAKE : NILES-MAGDEBURG Heavy Duty Lathe

MODEL : DP 3/3x20000, capacity DxL 2500x20000 mm, 3 off steadies

YEAR OF MANUFACTURE : 1979

CONTROLLER : conventional

SPECIFICATION : Swing over bed 2500 mm, Swing over cross slide 2000 mm, Swing in gap 3500 mm, Distance b/n centres 20000 mm, Max workpiece weight 30000 kg, Faceplate diameter 2500 mm Spindle diameter 100 mm, Spindle speeds range 0,45-140 rpm, Total power requirement 60 kW, Weight, ca. 64000 kg, 3 off steadies

Grinder, Centreless, Machines For Sale

MIKROSA Centreless Grinder, good condition, complete – 2OFF AVAILABLE SASL 400/1

MIKROSA Centreless Grinder, good condition, complete - 2OFF AVAILABLE SASL 400/1

MACHINE REF : 13066

Machines For Sale — Grinder, Centreless

MAKE : MIKROSA Centreless Grinder, good condition, complete - 2OFF AVAILABLE

MODEL : SASL 400/1

CONTROLLER : conventional

HARTFORD Vertical Machining Centre VMC1020S Fanuc OMD (1999)

HARTFORD Vertical Machining Centre VMC1020S Fanuc OMD ENQUIRY REF : MACHINE REF : 12379365 For Sale -- Machining Centre, Vertical MAKE : HARTFORD Vertical Machining Centre MODEL : VMC1020S Fanuc OMD (1999) MAKE : HARTFORD Vertical Machining Centre MODEL : VMC1020S Fanuc OMD (1999) Controller : FANUC OMD Specification : HARTFORD VMC1020 S X 1020 Y510 Z510mm Table 1200X600mm FACNUC Alarm 910 RAM PARITY, parameter problem No tooling Year Of Manufacture 1999